Bossweld v Groove MIG Drive Roller, 30 x 10 x 19 / 0.8/1.0

The Bossweld V Groove MIG Drive Roller is a replacement feed roller for welding with mild steel (solid) MIG wire. It comes in 7 sizes, from 30 x 10 x 8mm to 37 x 18.9 x 12mm, with groove sizes of 0.6/0.8mm, 0.8/1.0mm, 0.9/1.2mm and 1.0/1.2mm.

The V-shaped groove gives firm contact with solid steel wire for smooth, consistent feeding.

Where this product is used

• MIG welding with solid mild steel wire
• Replacing worn rollers that let the wire slip
• Changing wire size on the same machine

Features

• V-groove drive roller
• Sizes from 30 x 10 x 8 to 37 x 18.9 x 12mm (outer x inner x width)
• Groove sizes: 0.6/0.8mm, 0.8/1.0mm, 0.9/1.2mm and 1.0/1.2mm
• For solid steel wire

Key specifications

Choosing the right option

Match the roller to your wire type and size and to your machine: the outer diameter, bore (inner diameter) and width all have to match the roller you are replacing, and the groove has to suit the wire diameter. Replace rollers when the grooves are worn or the wire slips, and replace them as a set where your feeder uses more than one.