Brady J20C-2500-2551 B-2551 Polyester Tag, White, 63.5 mm x 15.24 m

Brady B-2551 is a heavy-duty polyester tag stock with an inkjet-printable vinyl layer, made for the BradyJet J2000 colour label printer. This listing has three items: a roll of 100 pre-cut tags with a punched hole (J20-255-2551, 82.55 x 146.05 mm), and two continuous tag rolls, 63.5 mm (J20C-2500-2551) and 82.55 mm (J20C-3250-2551) wide and 15.24 m (50 ft) long (manufacturer-stated).

B-2551 is a matte stock 0.39 mm (0.0152 in) thick. Brady quotes a service temperature of -40 to 60 °C and lists it as abrasion resistant (manufacturer-stated). Brady's page gives an average outdoor durability of 1 year for the two continuous rolls and 'not recommended' for the pre-cut tag, so treat the pre-cut tag as indoor stock (manufacturer-stated). Brady states that the stock meets OSHA 1910.145 for accident prevention tags and OSHA 1910.147 for lockout tagout (manufacturer-stated). Those are US federal regulations, not Australian requirements, so check your own site procedure and the relevant Australian Standards before relying on a tag for lockout or danger marking. Printing needs the J20-CMY ink cartridge (manufacturer-stated). Figures are Brady published values (manufacturer-stated).

Two numbers identify each product. The product code is Brady's alphanumeric part number, and it is the code to search for or quote. The Brady ordering number is the six-digit number Brady uses for the same product. Both are in the table below, and the Product Code shown for each option on this page is the part number.

Where this product is used

• Accident prevention, danger and lockout tags, printed in colour (manufacturer-stated).
• Facility, equipment, pipe and valve identification (manufacturer-stated).
• Hazard communication identification, and lean and 5S labelling (manufacturer-stated).
• Warehouse marking and general identification (manufacturer-stated).

Features

• Heavy-duty polyester with an inkjet-printable vinyl layer (manufacturer-stated)
• Service temperature -40 to 60 °C (manufacturer-stated)
• Abrasion resistant (manufacturer-stated)
• OSHA 1910.145 and 1910.147 stated by Brady (US regulations) (manufacturer-stated)
• Punched-hole pre-cut tag, or continuous rolls you cut to length (manufacturer-stated)
• Three items, each with its own product code

Common specifications

Key specifications

Selecting the right option

Choose the pre-cut J20-255-2551 for a standard punched tag, and a continuous roll when you need your own tag length. The J20C-2500-2551 is 63.5 mm wide and the J20C-3250-2551 is 82.55 mm wide. These tags print on the BradyJet J2000 only. For inkjet labels see the B-7425J inkjet laboratory labels for the J2000 and the B-2595 inkjet vinyl labels and tape for the J2000.

Related products

Related Brady products: B-2595 inkjet vinyl labels and tape for the J2000 and B-7425J inkjet laboratory labels for the J2000.