Brady B30C-1125-569-BL B-569 Low-Halide Polyester Tape, 28.58 mm x 30.48 m, Blue

Brady B-569 is a low-halide polyester tape on a continuous 30.48 m (100 ft) cartridge for Brady B30 series printers. This listing has 14 cartridges in three widths (28.58, 57.15 and 101.6 mm) and 11 colours: blue, brown, clear, green, light blue, orange, pink, purple, red, white and yellow (manufacturer-stated).

Brady describes B-569 as designed for marking stainless steel pipes, particularly in harsh environments, with a low halide content. It is a gloss polyester with a permanent pressure-sensitive acrylic adhesive, a service temperature from -40 to 100 °C, a minimum application temperature of -18 °C and an average outdoor durability of 3 to 5 years. It withstands mild chemicals, oil and water (manufacturer-stated). A ribbon is needed to print on it and is sold separately: Brady names B30-R10000 or B30-R10000-WT depending on the part. Brady's pages give imperial sizes, so metric figures are converted and may differ slightly from other listings.

Brady's pages list these parts as not containing an SVHC under REACH (manufacturer-stated). The Product Code is Brady's part number for each cartridge and the Brady ordering number is shown beside it in the table below. Each width comes in some colours only, so use the table to match a colour to a width.

Brady's printer list for this tape comes from its US page and includes the BBP30 to BBP37, i3300, i4311, i5300, S3000, S3100 and S3700. Its Australian page lists fewer printers, so check your printer and ribbon with us if you are unsure.

Where this product is used

• Marking stainless steel and other pipes in harsh environments (manufacturer-stated).
• Facility identification, pipe and valve marking and equipment labelling (manufacturer-stated).
• Colour-coded labelling where a low-halide polyester tape is needed.

Features

• Low-halide polyester with a gloss finish (manufacturer-stated)
• Permanent pressure-sensitive acrylic adhesive (manufacturer-stated)
• Service temperature -40 to 100 °C; average outdoor durability 3 to 5 years (manufacturer-stated)
• Continuous 30.48 m (100 ft) cartridge in three widths (manufacturer-stated)
• 11 colours, including clear (manufacturer-stated)
• Works with a B30-R10000 series ribbon, sold separately (manufacturer-stated)

Common specifications

Key specifications

Selecting the right option

Choose the width for your printer and job, then the colour from the table. The legend (print) colour comes from the ribbon you fit, so tell us what you plan to print if you are unsure. For the same polyester on the BBP85 see the BBP85 B-569 low-halide polyester labels, and for vinyl on B30 printers see the B-595 indoor and outdoor vinyl label tape for B30 printers. Brady's product pages are written for the US market, so standards or approvals they list may be North American. Ask us if an approval matters for your job.

Related products

Related Brady products: B-595 indoor and outdoor vinyl label tape for B30 printers, B30 series printer ribbons, BBP85 B-569 low-halide polyester labels, GlobalMark B-509 magnetic label tape and B31-CCT cutter cleaning tool for B30 printers.