Brady B85-100X15-595-BK B-595 Vinyl Label Roll, 101.6 mm x 15.24 m, Black

Brady B-595 indoor and outdoor vinyl labels come on continuous 15.24 m (50 ft) rolls for the Brady BBP85 and PowerMark printers. This listing has 48 rolls in four widths (101.6, 152.4, 203.2 and 254 mm) and twelve colours: black, blue, brown, clear, gold, green, grey, orange, purple, red, white and yellow (manufacturer-stated).

Brady describes B-595 as a vinyl with a permanent acrylic adhesive, listed for outdoor use, with a service temperature from -40 to 82 °C, a minimum application temperature of -18 °C and an average outdoor durability of 8 to 10 years. It lists BS 5609 sections 2 and 3 and RoHS compliance (with exemptions) (manufacturer-stated). A ribbon is required to print on it and is sold separately. Brady names ribbon 13510, 13511, 13512 or 13513 depending on the roll, shown in each variant's specification. See the BBP85 and PowerMark single colour ribbons, BBP85 two colour ribbons, 203.2 mm panels, BBP85 two colour ribbons, 406.4 mm panels and BBP85 four colour ribbons.

Brady's Australian page prints a part number for each coloured roll but none for the four clear rolls (order nos. 99495 to 99498), whose listing is brief, so for those we show only what that page gives and Brady rounds their sizes to 100, 150, 200 and 250 mm x 15 m. The Product Code is Brady's part number where one is printed, and the Brady ordering number is in the table below. Brady lists the coloured rolls as not containing an SVHC under REACH (manufacturer-stated).

Where this product is used

• Printing signs and labels on the BBP85 and PowerMark.
• Component and equipment labelling, electrical labelling, floor marking, and pipe and valve marking (manufacturer-stated).
• Facility identification, lean and 5S labelling, and warehouse marking (manufacturer-stated).

Features

• Vinyl with permanent acrylic adhesive for outdoor use (manufacturer-stated)
• Service temperature -40 to 82 °C (manufacturer-stated)
• Continuous 15.24 m (50 ft) rolls in four widths (manufacturer-stated)
• Twelve colours (manufacturer-stated)
• For the BBP85 and PowerMark; ribbon sold separately (manufacturer-stated)

Common specifications

Key specifications

Selecting the right option

Choose the width your printer set-up takes, then the colour. Tell us your ribbon and application if you are unsure, because the legend colour comes from the ribbon. For B30 printers see the B-595 indoor and outdoor vinyl label tape for B30 printers. Brady's product pages are written for the US market, so standards or approvals they list may be North American. Ask us if an approval matters for your job.

Related products

Related Brady products: B-595 indoor and outdoor vinyl label tape for B30 printers, BBP85 B-569 low-halide polyester labels, BBP85 B-584 retroreflective label tape, BBP85 BradyGlo photoluminescent label tape and BBP85 and PowerMark single colour ribbons.