Brady M4-72-461 Self-Laminating Cryogenic Polyester Label, 44.45 x 12.7 mm

Brady B-461 self-laminating cryogenic polyester labels are black on white wrap-around labels for laboratory use on Brady M4 and M5 label printers. This listing has 15 cartridges: 11 die-cut sizes from 28.58 x 9.53 mm to 95.25 x 38.1 mm (height x width), and four continuous tapes, 9.53, 12.7, 25.4 and 31.75 mm wide x 7.62 m (25 ft) (manufacturer-stated).

Brady describes B-461 as a matte polyester with a clear self-laminating wrap and a permanent acrylic adhesive for high surface energy surfaces, autoclavable and suitable for cryogenic storage, at 0.048 mm thick. Its spec table lists a service temperature of -196 to 110 °C, while its description gives an upper limit of 130 °C, so ask us to confirm the upper limit if you work near it (manufacturer-stated). The ribbon is included in the cartridge according to Brady's US page titles.

Printers come from Brady's pages: BMP41, BMP51, BMP53, M410, M510 and M511, though some sizes list only the BMP51, BMP53, M510 and M511, so check the printers listed for your part. Brady's pages list these parts as not containing an SVHC under REACH (manufacturer-stated). The Product Code is Brady's part number for each item and the Brady ordering number is shown beside it in the table below.

Where this product is used

• Laboratory labelling (manufacturer-stated).
• Tube and vial labelling for cryogenic storage and autoclaving (manufacturer-stated).

Features

• Self-laminating polyester with a permanent acrylic adhesive (manufacturer-stated)
• Autoclavable and suitable for cryogenic storage (manufacturer-stated)
• Service temperature -196 to 110 °C (spec table) (manufacturer-stated)
• 11 die-cut sizes and four continuous tapes (manufacturer-stated)
• Ribbon included in the cartridge (manufacturer-stated)

Common specifications

Key specifications

Die-cut labels are shown as height x width; tapes as width x length. Sizes follow Brady's pages.

Selecting the right option

Choose the size to fit your tube or vial. For FreezerBondz cryogenic labels see the M5 FreezerBondz matte labels and M4 and M5 B-492 FreezerBondz labels. Brady's product pages are written for the US market, so standards or approvals they list may be North American. Ask us if an approval matters for your job.

Related products

Related Brady products: M5 FreezerBondz matte labels, M4 and M5 B-492 FreezerBondz labels, M5 StainerBondz microscope slide labels and B-488 solvent resistant polyester labels.