Brady B30-25-855-OSHADA B-855 ToughWash DANGER Header Label, 152.4 x 101.6 mm

Brady ToughWash B-855 is a matte polyester made for food and beverage processing areas where labels are exposed to heat, harsh chemicals and repeated washdown. This listing has four continuous tapes for B30 series printers (28.58, 57.15 and 101.6 mm wide, 15.24 m long, in white and yellow) and one die-cut label with a pre-printed DANGER header, 152.4 x 101.6 mm, 100 labels to the cartridge (manufacturer-stated).

B-855 is 0.18 mm (0.007 in) thick with a permanent acrylic adhesive. Brady quotes a service temperature of -40 to 110 °C, lists it as abrasion, chemical and washdown resistant, and recommends it for indoor use (manufacturer-stated). Brady does not give a washdown pressure or temperature in its specification table, so check your own wash-down procedure against a printed sample. The header label has a pre-printed DANGER header in the OSHA style, which is a US format, and a printable area of 76.2 x 152.4 mm (manufacturer-stated). Brady lists B30-R6000 as the ribbon for the whole range (manufacturer-stated). Figures are Brady published values (manufacturer-stated).

Two numbers identify each product. The product code is Brady's alphanumeric part number, and it is the code to search for or quote. The Brady ordering number is the six-digit number Brady uses for the same product. Both are in the table below, and the Product Code shown for each option on this page is the part number.

Where this product is used

• Food and beverage process labelling (manufacturer-stated).
• General identification and safety identification in aggressive and washdown areas (manufacturer-stated).
• Facility identification with the DANGER header label (manufacturer-stated).

Features

• Matte polyester with permanent acrylic adhesive (manufacturer-stated)
• Withstands heat, harsh chemicals and numerous washdown cycles (manufacturer-stated)
• Service temperature -40 to 110 °C (manufacturer-stated)
• Abrasion, chemical and washdown resistant (manufacturer-stated)
• Pre-printed DANGER header label in 152.4 x 101.6 mm (manufacturer-stated)
• Five items, each with its own product code

Common specifications

Key specifications

Selecting the right option

Choose a continuous tape for pipe, equipment and container labelling and the header label when you need a ready-made DANGER sign face. The ToughWash ribbon B30-R6000 is a different ribbon from the B30-R10000 and B30-R4300 on the B30 series printer ribbons, so check the ribbon you need before you order. For labels that wash off with warm water see the B-403 water-soluble paper label tape and for other B30 tapes see the B-549 cold temperature label tape.

Related products

Related Brady products: B30 series printer ribbons, B-549 cold temperature label tape, B-581 repositionable vinyl label tape and B-403 water-soluble paper label tape.