Finer Power bronze Hollow Bar, 1-1/4 / 1-3/4

This is a hollow bronze bar in 4 imperial sizes, with outside diameters from 1-1/2 to 2-1/2" and inside diameters from 1/2 to 1-1/4". Each piece is 12" long (about 30cm).

Hollow bar saves boring a solid bar when you are making a bush, sleeve or wear ring, so there is less machining and less waste.

Where this product is used

• Machining bushes, bearings and sleeves
• Wear rings, spacers and thrust washers
• Replacement parts for worn bronze components
• Workshop stock for repairs and one-off parts

Features

• Hollow bronze bar, 12" lengths
• 4 imperial sizes, outside diameter 1-1/2 to 2-1/2"
• Outside and inside diameter for every part number
• Bronze machines well, has low friction and resists corrosion
• Cut and machine to the length and finish you need

Key specifications

Sizes available

Choosing the right option

Choose the bar from the finished outside and inside diameters, and allow extra material on both for machining. If the part needs no boring, see Bronze Solid Bar, Imperial, 1/2 to 2" Diameter, 12" Lengths.

Cut the bar to length oversize and leave a machining allowance on the diameters you need to finish.