Finer Power bronze Solid Bar, outside diameter (b) inch 1/2

This is a solid round bronze bar in 7 imperial diameters, 1/2 to 2". Each piece is 12" long (about 30cm).

Solid bar is bought to machine into bushes, bearings, sleeves, wear rings and similar parts.

Where this product is used

• Machining bushes, bearings and sleeves
• Wear rings, spacers and thrust washers
• Replacement parts for worn bronze components
• Workshop stock for repairs and one-off parts

Features

• Solid round bronze bar, 12" lengths
• 7 imperial diameters, 1/2 to 2"
• Diameter for every part number
• Bronze machines well, has low friction and resists corrosion
• Cut and machine to the length and finish you need

Key specifications

Sizes available

Choosing the right option

Choose the bar from the largest finished diameter, and allow extra material for turning. If you need a bore through the part, hollow bar saves machining time: see Bronze Hollow Bar, Imperial, 1-1/2 to 2-1/2" OD, 12" Lengths.

Cut the bar to length oversize and leave a machining allowance on the diameters you need to finish.