IKO CRH16VBUUR Heavy Duty Inch Cam Follower, 5/8 in stud, 1 in OD, Sealed, Crowned
Available
This page covers 17 IKO CRH Series heavy duty inch cam followers (CRH10-1VBUUR to CRH56VBUUR, 5/8 to 3 1/2 in OD): a hexagon hole in the stud head, full complement needle rollers, sealed type construction and a crowned outer ring. Choose the size in the options above; each variant has its own dimensions and ratings in the Model Details.
The CRH series is the inch series heavy duty cam follower, a full complement type with a black oxide film treatment. A cam follower is a bearing with a stud, with needle rollers inside a thick-walled outer ring. The outer ring rotates and runs directly on the mating track (cam guide surface), so cam followers suit cam mechanisms and linear motions and are used in machine tools, industrial robots, electronic devices and office automation (OA) equipment.
In the part number, the number is the outer ring diameter in 1/16 inch; B is the hexagon hole in the stud head, V is the full complement type (no V is with cage), UU is the sealed type (no UU is the shield type), and R is the crowned outer ring (no R is cylindrical). Every model on this page is sealed type, full complement, crowned outer ring.
Where this product is used
- Cam mechanisms, with the outer ring running directly on the cam track
- Linear motion and follower applications
- Machine tools and industrial robots
- Electronic devices and office automation (OA) equipment
Features
- Inch series heavy duty stud type with a hexagon hole in the stud head and a black oxide film treatment
- Full complement needle rollers: suited to heavy loads at low speed rotations
- Sealed type: seals fitted in the narrow clearances keep foreign substances out
- Crowned outer ring (R): moderates the edge load caused by mounting errors
- Prepacked with grease
- Supplied with a nut and, on the larger studs, a grease nipple (see the Model Details for each size)
- Basic dynamic load rating C 6,340 to 111,000 N and static load rating C0 8,530 to 239,000 N (each size in the Model Details)
- Track capacity 579 to 14,100 N on a 40 HRC mating surface
Key specifications
| Specification | Detail |
|---|---|
| Type | Inch series heavy duty cam follower (stud type) |
| Models | CRH10-1VBUUR to CRH56VBUUR (17 sizes) |
| Stud diameter d1 | 7.938 to 44.45 mm (5/16 to 1 3/4 in) |
| Thread G | 5/16-24 to 1 3/4-12UN |
| Outer ring diameter D | 15.875 to 88.9 mm (5/8 to 3 1/2 in) |
| Outer ring width C | 11.112 to 50.8 mm (7/16 to 2 in) |
| Rolling elements | Full complement needle rollers |
| Seal | Sealed type (UU in the part number) |
| Outer ring | Crowned outer ring (R in the part number) |
| Stud head | Hexagon hole in the stud head (B in the part number) |
| Basic dynamic load rating C | 6,340 to 111,000 N |
| Basic static load rating C0 | 8,530 to 239,000 N |
| Track capacity (mating surface 40 HRC) | 579 to 14,100 N |
| Lubrication | Prepacked with grease |
| Recommended mounting hole tolerance for the stud | F7 |
| Brand | IKO (Nippon Thompson Co., Ltd., Japan) |
Available sizes
Show all 17 sizes with dimensions, load ratings and mass
| Model | Stud d1 mm (in) | Thread G | OD D mm (in) | Width C mm (in) | C (N) | C0 (N) | Mass (g) |
|---|---|---|---|---|---|---|---|
| CRH10-1VBUUR | 7.938 (5/16) | 5/16-24 | 15.875 (5/8) | 11.112 (7/16) | 6,340 | 8,530 | 23 |
| CRH11VBUUR | 7.938 (5/16) | 5/16-24 | 17.462 (11/16) | 11.112 (7/16) | 6,340 | 8,530 | 27 |
| CRH12VBUUR | 11.112 (7/16) | 7/16-20 | 19.05 (3/4) | 12.7 (1/2) | 8,710 | 12,300 | 39 |
| CRH14VBUUR | 11.112 (7/16) | 7/16-20 | 22.225 (7/8) | 12.7 (1/2) | 8,710 | 12,300 | 49 |
| CRH16VBUUR | 15.875 (5/8) | 5/8-18 | 25.4 (1) | 15.875 (5/8) | 13,100 | 22,700 | 93 |
| CRH18VBUUR | 15.875 (5/8) | 5/8-18 | 28.575 (1 1/8) | 15.875 (5/8) | 13,100 | 22,700 | 109 |
| CRH20VBUUR | 19.05 (3/4) | 3/4-16 | 31.75 (1 1/4) | 19.05 (3/4) | 23,600 | 31,700 | 176 |
| CRH22VBUUR | 19.05 (3/4) | 3/4-16 | 34.925 (1 3/8) | 19.05 (3/4) | 23,600 | 31,700 | 200 |
| CRH24VBUUR | 22.225 (7/8) | 7/8-14 | 38.1 (1 1/2) | 22.225 (7/8) | 28,200 | 40,100 | 296 |
| CRH26VBUUR | 22.225 (7/8) | 7/8-14 | 41.275 (1 5/8) | 22.225 (7/8) | 28,200 | 40,100 | 329 |
| CRH28VBUUR | 25.4 (1) | 1-14 UNS | 44.45 (1 3/4) | 25.4 (1) | 35,300 | 55,600 | 463 |
| CRH30VBUUR | 25.4 (1) | 1-14 UNS | 47.625 (1 7/8) | 25.4 (1) | 35,300 | 55,600 | 508 |
| CRH32VBUUR | 28.575 (1 1/8) | 1 1/8-12 | 50.8 (2) | 31.75 (1 1/4) | 45,700 | 80,600 | 722 |
| CRH40VBUUR | 31.75 (1 1/4) | 1 1/4-12 | 63.5 (2 1/2) | 38.1 (1 1/2) | 61,400 | 116,000 | 1,260 |
| CRH44VBUUR | 31.75 (1 1/4) | 1 1/4-12 | 69.85 (2 3/4) | 38.1 (1 1/2) | 61,400 | 116,000 | 1,460 |
| CRH52VBUUR | 38.1 (1 1/2) | 1 1/2-12 | 82.55 (3 1/4) | 44.45 (1 3/4) | 77,600 | 172,000 | 2,380 |
| CRH56VBUUR | 44.45 (1 3/4) | 1 3/4-12UN | 88.9 (3 1/2) | 50.8 (2) | 111,000 | 239,000 | 3,240 |
Sizes are in mm with the inch size in brackets. C is the basic dynamic load rating and C0 the basic static load rating. Mass is for the product body only: the nut, grease nipple and other accessories are not included.
Selecting the right option
The options on this page are the stud diameter (inch) and the roller width (the outer ring width C). Where two models would otherwise show the same stud diameter and roller width, the model number is added in brackets to the roller width of the second one.
Models with the same stud diameter and roller width but a different outer ring diameter D: 15.875 mm (5/8 in) OD and 17.462 mm (11/16 in) OD (CRH10-1VBUUR and CRH11VBUUR); 19.05 mm (3/4 in) OD and 22.225 mm (7/8 in) OD (CRH12VBUUR and CRH14VBUUR); 25.4 mm (1 in) OD and 28.575 mm (1 1/8 in) OD (CRH16VBUUR and CRH18VBUUR); 31.75 mm (1 1/4 in) OD and 34.925 mm (1 3/8 in) OD (CRH20VBUUR and CRH22VBUUR); and others in the size table. Check the Model Details for D before you order.
Match the stud diameter and thread to your mounting hole and nut: the Model Details list the thread, the thread length and the hexagon hole size.
This page is the crowned outer ring type (R in the part number). The crowned ring is effective in moderating the edge load caused by mounting errors, and it is the type to use if the outer ring does not make good contact with the mating running surface.
Every model here is the full complement type, which is suited to heavy loads at low speed rotations.
The Model Details give each dimension in mm with the inch size in brackets.
Fitting and use
Make the centre axis of the mounting hole perpendicular to the direction of travel and match the stud shoulder accurately with the seating surface given by dimension f (min.) in the Model Details. Keep the chamfer on the mounting hole as small as possible (C0.5 or so), and do not hit the flange head directly with a hammer, because that can lead to irregular rotation or cracking.
Hold the hexagon hole with a hex key and tighten the nut with a spanner: turning the hexagon hole itself to tighten can damage it. Do not exceed the maximum tightening torque in the Model Details, because an over-tightened thread can break. Where loosening is possible, use a lock nut, spring washer or self-locking nut.
The mark on the flange head shows the oil hole position on the raceway: keep the oil hole out of the loading zone. The recommended mounting hole tolerance for the stud is F7.
Lubrication: the models on this page are prepacked with grease.
Track capacity is the load that can be applied continuously on a steel cam guide surface of 40 HRC without deforming or indenting it.
Related products
Other IKO CRH series pages (other outer ring, rolling element, seal or material types): CRH series heavy duty inch cam followers, full complement, sealed, cylindrical, 1/2 to 3 1/2 in OD. Related stud types: CR series inch cam followers, full complement, sealed, crowned, 1/2 to 1 1/2 in OD.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
IKO CRH Series Heavy Duty Inch Cam Followers, Hex Hole, Full Complement, Sealed, Crowned Outer Ring, 5/8 to 3 1/2 in OD: 5/8 / 5/8 in
SKU: A0155868 | Model: CRH16VBUUR/IKO
IKO CRH16VBUUR heavy duty inch cam follower, 5/8 in stud, full complement, sealed, crowned outer ring.

