IKO CR22BUU Inch Cam Follower, 1/2 in stud, 1 3/8 in OD, Sealed, Cylindrical
Available
This page covers 16 IKO CR Series inch cam followers (CR8BUU to CR36BUU, 1/2 to 2 1/4 in OD): a hexagon hole in the stud head, needle rollers in a cage, sealed type construction and a cylindrical outer ring. Choose the size in the options above; each variant has its own dimensions and ratings in the Model Details.
The CR series is the inch series cam follower, sized in fractions of an inch. A cam follower is a bearing with a stud, with needle rollers inside a thick-walled outer ring. The outer ring rotates and runs directly on the mating track (cam guide surface), so cam followers suit cam mechanisms and linear motions and are used in machine tools, industrial robots, electronic devices and office automation (OA) equipment.
In the part number, the number is the outer ring diameter in 1/16 inch; B is the hexagon hole in the stud head (no B is the screwdriver slot), V is the full complement type (no V is with cage), UU is the sealed type (no UU is the shield type), and R is the crowned outer ring (no R is cylindrical). Every model on this page is sealed type, with cage, cylindrical outer ring.
Where this product is used
- Cam mechanisms, with the outer ring running directly on the cam track
- Linear motion and follower applications
- Machine tools and industrial robots
- Electronic devices and office automation (OA) equipment
Features
- Inch series stud type with a hexagon hole in the stud head
- Needle rollers in a cage: a small coefficient of friction and suited to high speed rotations
- Sealed type: seals fitted in the narrow clearances keep foreign substances out
- Cylindrical outer ring: a large contact area on the mating guide surface, suited to large loads or a low hardness guide surface
- Prepacked with grease
- Supplied with a nut and, on the larger studs, a grease nipple (see the Model Details for each size)
- Basic dynamic load rating C 2,520 to 32,500 N and static load rating C0 2,140 to 63,900 N (each size in the Model Details)
- Track capacity 2,140 to 34,700 N on a 40 HRC mating surface
Key specifications
| Specification | Detail |
|---|---|
| Type | Inch series cam follower (stud type) |
| Models | CR8BUU to CR36BUU (16 sizes) |
| Stud diameter d1 | 4.826 to 22.225 mm |
| Thread G | No. 10-32 to 7/8-14 |
| Outer ring diameter D | 12.7 to 57.15 mm (1/2 to 2 1/4 in) |
| Outer ring width C | 8.731 to 31.75 mm (11/32 to 1 1/4 in) |
| Rolling elements | Needle rollers with cage |
| Seal | Sealed type (UU in the part number) |
| Outer ring | Cylindrical outer ring |
| Stud head | Hexagon hole in the stud head (B in the part number) |
| Basic dynamic load rating C | 2,520 to 32,500 N |
| Basic static load rating C0 | 2,140 to 63,900 N |
| Track capacity (mating surface 40 HRC) | 2,140 to 34,700 N |
| Lubrication | Prepacked with grease |
| Recommended mounting hole tolerance for the stud | F7 |
| Brand | IKO (Nippon Thompson Co., Ltd., Japan) |
Available sizes
Show all 16 sizes with dimensions, load ratings and mass
| Model | Stud d1 mm (in) | Thread G | OD D mm (in) | Width C mm (in) | C (N) | C0 (N) | Mass (g) |
|---|---|---|---|---|---|---|---|
| CR8BUU | 4.826 | No. 10-32 | 12.7 (1/2) | 8.731 (11/32) | 2,520 | 2,140 | 9 |
| CR8-1BUU | 4.826 | No. 10-32 | 12.7 (1/2) | 9.525 (3/8) | 2,520 | 2,140 | 10 |
| CR10BUU | 6.35 (1/4) | 1/4-28 | 15.875 (5/8) | 10.319 (13/32) | 3,650 | 3,670 | 19 |
| CR10-1BUU | 6.35 (1/4) | 1/4-28 | 15.875 (5/8) | 11.112 (7/16) | 3,650 | 3,670 | 21 |
| CR12BUU | 9.525 (3/8) | 3/8-24 | 19.05 (3/4) | 12.7 (1/2) | 4,420 | 5,110 | 35 |
| CR14BUU | 9.525 (3/8) | 3/8-24 | 22.225 (7/8) | 12.7 (1/2) | 4,790 | 5,810 | 46 |
| CR16BUU | 11.112 (7/16) | 7/16-20 | 25.4 (1) | 15.875 (5/8) | 8,810 | 10,800 | 73 |
| CR18BUU | 11.112 (7/16) | 7/16-20 | 28.575 (1 1/8) | 15.875 (5/8) | 9,180 | 11,600 | 99 |
| CR20BUU | 12.7 (1/2) | 1/2-20 | 31.75 (1 1/4) | 19.05 (3/4) | 14,200 | 16,000 | 132 |
| CR22BUU | 12.7 (1/2) | 1/2-20 | 34.925 (1 3/8) | 19.05 (3/4) | 14,200 | 16,000 | 157 |
| CR24BUU | 15.875 (5/8) | 5/8-18 | 38.1 (1 1/2) | 22.225 (7/8) | 18,600 | 24,300 | 225 |
| CR26BUU | 15.875 (5/8) | 5/8-18 | 41.275 (1 5/8) | 22.225 (7/8) | 18,600 | 24,300 | 260 |
| CR28BUU | 19.05 (3/4) | 3/4-16 | 44.45 (1 3/4) | 25.4 (1) | 25,100 | 38,200 | 365 |
| CR30BUU | 19.05 (3/4) | 3/4-16 | 47.625 (1 7/8) | 25.4 (1) | 25,100 | 38,200 | 410 |
| CR32BUU | 22.225 (7/8) | 7/8-14 | 50.8 (2) | 31.75 (1 1/4) | 32,500 | 63,900 | 615 |
| CR36BUU | 22.225 (7/8) | 7/8-14 | 57.15 (2 1/4) | 31.75 (1 1/4) | 32,500 | 63,900 | 750 |
Sizes are in mm with the inch size in brackets. C is the basic dynamic load rating and C0 the basic static load rating. Mass is for the product body only: the nut, grease nipple and other accessories are not included.
Selecting the right option
The options on this page are the stud diameter (inch) and the roller width (the outer ring width C). Where two models would otherwise show the same stud diameter and roller width, the model number is added in brackets to the roller width of the second one.
Models with the same stud diameter and roller width but a different outer ring diameter D: 19.05 mm (3/4 in) OD and 22.225 mm (7/8 in) OD (CR12BUU and CR14BUU); 25.4 mm (1 in) OD and 28.575 mm (1 1/8 in) OD (CR16BUU and CR18BUU); 31.75 mm (1 1/4 in) OD and 34.925 mm (1 3/8 in) OD (CR20BUU and CR22BUU); 38.1 mm (1 1/2 in) OD and 41.275 mm (1 5/8 in) OD (CR24BUU and CR26BUU); and others in the size table. Check the Model Details for D before you order.
Match the stud diameter and thread to your mounting hole and nut: the Model Details list the thread, the thread length and the hexagon hole size.
This page is the cylindrical outer ring type. A cylindrical ring has a large contact area with the mating guide surface and suits applications where the applied load is large or the guide surface hardness is low.
Every model here has a cage, which gives a small coefficient of friction and suits high speed rotations.
The Model Details give each dimension in mm with the inch size in brackets.
Fitting and use
Make the centre axis of the mounting hole perpendicular to the direction of travel and match the stud shoulder accurately with the seating surface given by dimension f (min.) in the Model Details. Keep the chamfer on the mounting hole as small as possible (C0.5 or so), and do not hit the flange head directly with a hammer, because that can lead to irregular rotation or cracking.
Hold the hexagon hole with a hex key and tighten the nut with a spanner: turning the hexagon hole itself to tighten can damage it. Do not exceed the maximum tightening torque in the Model Details, because an over-tightened thread can break. Where loosening is possible, use a lock nut, spring washer or self-locking nut.
The mark on the flange head shows the oil hole position on the raceway: keep the oil hole out of the loading zone. The recommended mounting hole tolerance for the stud is F7.
Lubrication: the models on this page are prepacked with grease.
Track capacity is the load that can be applied continuously on a steel cam guide surface of 40 HRC without deforming or indenting it.
Related products
Other IKO CR series pages (other outer ring, rolling element, seal or material types): CR series inch cam followers, full complement, sealed, cylindrical, 1/2 to 2 in OD, CR series inch cam followers, with cage, sealed, crowned, 1/2 to 2 in OD, CR series inch cam followers, full complement, sealed, crowned, 1/2 to 1 1/2 in OD and CR48VUU inch cam follower. Related stud types: CRH series heavy duty inch cam followers, full complement, sealed, cylindrical, 1/2 to 3 1/2 in OD.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
IKO CR Series Inch Cam Followers, Hex Hole, With Cage, Sealed, Cylindrical Outer Ring, 1/2 to 2 1/4 in OD: 1/2 / 3/4 in (CR22BUU)
SKU: A0155928 | Model: CR22BUU/IKO
IKO CR22BUU inch cam follower, 1/2 in stud, with cage, sealed, cylindrical outer ring.

