CorrosionX 91002 Corrosion Inhibitor, Moisture Displacer & Lubricant Trigger Spray 473ml
Available
CorrosionX 91002 is the standard, thin-film CorrosionX corrosion inhibitor, moisture displacer and lubricant in liquid form, in a trigger spray bottle. CorrosionX will not short sensitive circuits or interfere with electrical connections. As a liquid with no propellant, the bulk SDS figures for solids, specific gravity and flash point apply to this pack, not the aerosol figures.
Where this product is used
- Marine: engines, generators, throttle and steering cables, deck hardware, battery terminals and wiring harnesses
- Electrical gear exposed to moisture: switches, circuit breakers, fuse holders and electric motors
- Industrial: bearings and bushings, pulleys, air and power tools, stuck valves, wire rope and cable
- Locks, hinges and door and window slides
- Automotive: frame and body, lugs, nuts and bolts, battery terminals
- Household, lawn and garden: tools, garage door openers, casters and tracks, fans and A/C units
Features
- Polar Bonding: attracted to metal, displaces moisture and electrolytes that accelerate corrosion
- Ultra-thin, self-healing film that seals metal from the environment
- Film thickness about 0.0004" (10 µm), coverage approx. 3,300 sq ft per gallon (about 81 m²/L)
- 0.249mm four-ball wear scar (ASTM D4172) and 0.083 friction coefficient
- Compatible metals: iron, steel, stainless steel, aluminium, copper, brass and bronze
Key specifications
| Specification | Detail |
|---|---|
| Brand | CorrosionX |
| Product type | Corrosion Inhibitor |
| Chemical type | Hydrotreated heavy paraffinic petroleum distillate (over 90% by weight) with alkenyl amine (0.1-1%) |
| Appearance | Greenish brown, clear, non-viscous liquid, fresh scent |
| Viscosity (40 °C / 100 °C) | 33.2 cSt / 7.0 cSt |
| Flash point (Cleveland open cup) | 143 °C |
| Specific gravity (15.6 °C) | 0.895 |
| Solids | Non-volatile by volume 96% |
| Film thickness / coverage | About 0.0004" (10 µm), approx. 3,300 sq ft per gallon (about 81 m²/L) |
| Operating temperature range | -30 °C to over 204 °C (-22 °F to >400 °F) for standard CorrosionX |
| Salt spray (ASTM B117) | >360 hrs on carbon steel, polished 1020 carbon steel panel, 0 to <1% surface rust) |
| Humidity cabinet (ASTM D1748) | 1,320 hrs |
| Anti-wear (ASTM D4172, four-ball) and friction | 0.249mm wear scar |
| Source | Corrosion Technologies bulk SDS (22 June 2017, US format) |
Using it
No directions for application, surface preparation, film build or re-application intervals.
Slight swelling or softening of butyl rubber. Some adhesives may soften and silicone sealants may swell slightly, so test a small sample first. Paints typically used on aircraft, automobiles and machinery are unaffected; polishes and some wax coatings may soften. It is compatible with acrylic, polyester, nylon, vinyl, Delrin, PTFE, Formica, polyethylene and polypropylene. It is absorbed into the fibres of most fabrics and will stain them. The stain is not permanent and can be removed with naphtha or mineral spirits.
Avoid breathing mist or spray, and wear protective gloves.
Storage and handling
Store at room temperature, 10 °C (50 °F) or more, in a cool, dry, well-ventilated place in the original container, and keep the container closed when not in use. An indefinite shelf life for bulk liquid while the container remains capped.
Limits and safety
US SDS classification for the liquid: Skin Sensitiser Category 1A, Eye Irritation Category 2B, Aspiration Hazard Category 1B, signal word DANGER. Causes eye irritation, may cause an allergic skin reaction and may be fatal if swallowed and enters airways. It is non-hazardous / non-restricted for road, sea and air transport. Heating above 180 °C over long periods degrades the resin. The military specification listings are US qualifications only.
Choosing the right option
This is the thin-film grade in a liquid trigger pack. CorrosionX XD Corrosion Inhibitor & Lubricant is the medium-build version between the two.
The same formulation is also sold as an aerosol in CorrosionX 90102 Corrosion Inhibitor, Moisture Displacer & Lubricant Aerosol 473ml.
See also: CorrosionX 90102 Corrosion Inhibitor, Moisture Displacer & Lubricant Aerosol 473ml, CorrosionX 90104 Heavy Duty Corrosion Inhibitor, Moisture Displacer & Lubricant Aerosol 355ml, CorrosionX Corrosion Inhibitor, Moisture Displacer & Lubricant, CorrosionX XD Corrosion Inhibitor & Lubricant.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
CorrosionX 91002 Corrosion Inhibitor, Moisture Displacer & Lubricant Trigger Spray 473ml
SKU: A0075642 | Model: 91002-CORROX
CorrosionX A0075642: corrosionX 91002 thin-film corrosion inhibitor. Pack type: Trigger spray. Type: Corrosion inhibitor, moisture displacer and lubricant. Formulation: Standard (thin film).

