CRC Anti-Spatter for Welding, 300g
Out of stock
CRC Anti-Spatter for Welding is a water-based aerosol lubricant. It provides a coating that prevents welding spatter adhering to surrounding metal surfaces, removing the need to chisel, grind or wire brush spatter after welding.
The water-based film wipes off with a cloth or rag, leaving the surface ready for paint or protective coatings such as CRC Zinc It. It suits resistance welding tips, MIG and TIG tips, weldments, electrode holders, contact tips, tools, metal moulds and bench top splash guards.
Where this product is used
- Resistance welding tips
- MIG and TIG tips, and contact tips
- Weldments
- Electrode holders
- Tools
- Metal moulds and bench top splash guards
Features
- Water-based formula that allows easy clean-up without solvent cleaners
- It minimises paint and coating adherence problems caused by petroleum and silicone residues, and allows parts to be welded while wet
- Low odour
- Rust inhibiting additive, which prevents flash rust of in-process and surrounding metal surfaces
- Non-drying film
- It contains no known ozone depleting chemicals
Key specifications
| Specification | Detail |
|---|---|
| Brand | CRC |
| Product type | Water-based aerosol anti-spatter (release agent) |
| Pack | 300g aerosol |
| Appearance | White liquid as dispensed; milky white emulsion without propellant |
| Flash point | < 0 °C (propellant; ASTM D-56 < 0 °C TCC) |
| Boiling point (without propellant) | 100 °C |
| Specific gravity (without propellant) | 0.8872 |
| pH | 9.5 |
| Propellant | Dimethyl ether (DME) |
| Film | Non-drying; soluble in water |
| Composition | Water 55 to 65%; dimethyl ether 20 to 30%; glycerides 10 to 15%; white mineral oil (petroleum) 1 to 3% |
| VOC content (Fed) | 221g/L |
| Hazard classification | Warning. Flammable aerosol; pressurised container may burst if heated. UN 1950, Aerosols, Class 2.1 |
| CRC product number | 3033 |
Choosing the right option
For other CRC Weld-Aid anti-spatter formats see CRC Weld-Aid Weld-Kleen 350 Anti-Spatter, CRC Weld-Aid Weld-Kleen HD Anti-Spatter 20oz (566g) and CRC Weld-Aid Nozzle-Kleen #2 Anti-Spatter 16oz (453g). CRC Aerosol Zinc It Galvanic Rust Protection 350g is one of the protective coatings that can follow.
See also: CRC Weld-Aid Weld-Kleen 350 Anti-Spatter, CRC Weld-Aid Weld-Kleen HD Anti-Spatter 20oz (566g), CRC Weld-Aid Nozzle-Kleen #2 Anti-Spatter 16oz (453g), CRC Weld-Aid Nozzle-Dip HD Anti-Spatter Dip Gel 32oz (946ml).
Using it
Read the entire label before using. Shake well and hold the can 8 to 12" (about 20 to 30cm) from the surface.
Spray a light even film on the area to be welded. Use it on a clean surface.
After welding, wipe or clean before applying another treatment.
For personal safety, do not use while equipment is energized.
Storage and handling
Protect from sunlight and do not expose to temperatures above 50 °C. Do not puncture or incinerate the can.
Limits and safety
Hazard classification: signal word Warning. Flammable aerosol, category 2. Pressurised container: may burst if heated. It is not classified as a health or environmental hazard. Transport: UN 1950, Aerosols, Class 2.1, no packing group allocated. Aerosol cans will conduct electricity: keep away from all live electrical sources including battery terminals, solenoids and electrical panels, and do not use while equipment is energized. Use only in a well ventilated area. Read the safety data sheet before use.
Keep it away from heat and ignition sources.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
CRC Anti-Spatter for Welding, 300g
SKU: A0071961 | Model: 3033
CRC 3033: CRC Anti-Spatter for Welding. Size: 300g. Pack: Aerosol.