CRC SmartWasher OzzyJuice SW-8 Select Metals Solution 20L

CRC SmartWasher OzzyJuice SW-8 is a select metals degreasing solution for the CRC SmartWasher, supplied in a 20L pail. It is a water-based, solvent-free mix of emulsifiers and surfactants. It was formerly called SW-6.8.

It is specialised for aerospace, weapons or select metals, and not corrosive to a wide range of yellow and ferrous metals. It is optimised for soft and ferrous metals.

Where this product is used

• Aerospace, weapons or select metals
• Soft and ferrous metals
• Weapons cleaning
• Some aircraft applications
• Hydraulic transmission fluid, motor oil, automotive grease and resin products as contaminants

Features

• Water-based and solvent-free
• Phosphate-free, so no white residue when dry
• Bioremediating
• Designed to rinse cleanly without streaking
• NSF A1 approved (143779)
• Not classified as hazardous under Safe Work Australia criteria and not classified as a dangerous good
• Add as supplied to the SmartWasher as needed

Key specifications

Choosing the right option

SW-8 is the select metals grade. For other OzzyJuice grades see CRC SmartWasher OzzyJuice SW-4 Heavy Duty Degreasing Solution 20L and CRC SmartWasher OzzyJuice High Performance Degreasing Solution SW-X1, 18.9L. SW-8 is the fluid in the SW-28-8 and SW-37-8 starter kits, see CRC SmartWasher Starter Kit SW-28-8 and CRC SmartWasher Starter Kit SW-37-8.

See also: CRC SmartWasher OzzyJuice SW-4 Heavy Duty Degreasing Solution 20L, CRC SmartWasher OzzyJuice High Performance Degreasing Solution SW-X1, 18.9L, CRC SmartWasher OzzyMat FL-4 Multi-Layer Filter, CRC SmartWasher Starter Kit SW-28-8.

Using it

Directions: add as supplied to the SmartWasher as needed. A light comes on when the SmartWasher is low on OzzyJuice.

Dispose of contents and container in accordance with local regulations.

Storage and handling

Do not store below 0°C.

Limits and safety

It may cause irritation to the eyes and skin. Skin contact may cause temporary mild skin irritation, and prolonged or repeated contact may result in drying and defatting of the skin. Eye contact may cause discomfort, lacrimation and redness. Wear splash-proof goggles and PVC or rubber gloves. It is compatible with most commonly used materials. The Mil-PRF-29602A wording is a US military specification and does not imply an Australian approval. Read the safety data sheet before use.

Its former name is SW-6.8.