CRC Trefolex Cutting Paste 500ml
Available
CRC Trefolex Cutting Paste is a green, active cutting compound paste containing a colloid. It does not run off or evaporate, and it melts slowly as frictional heat is generated to give continuous lubrication throughout low speed cutting operations.
It suits use with taps and dies, hacksaws, reamers and all hand tools, and for low speed cutting operations only. It significantly increases tool life, improves threads and gives clean cuts with no tearing on steel, aluminium, copper, brass and stainless steel.
Where this product is used
- Taps and dies
- Hacksaws and reamers
- Pipe screwing, hacksawing, tapping and reaming
- All hand tools
- Low speed cutting operations only
Features
- Active cutting compound paste containing a colloid
- Melts slowly as frictional heat is generated, for continuous lubrication in low speed cutting
- Does not run off or evaporate
- It significantly increases tool life and improves threads, with clean cuts and no tearing
- Suitable for steel, aluminium, copper, brass and stainless steel
- Green paste, ready for immediate use
- Not classified as hazardous and not a dangerous good
Key specifications
| Specification | Detail |
|---|---|
| Brand | CRC |
| Product type | Active cutting compound paste containing a colloid |
| CRC product number | 3060 (500ml), 3061 (2L) |
| Pack sizes | 500ml and 2L |
| Appearance | Green paste |
| Type of film | Viscous oily paste |
| Dry time | Immediate use |
| Flash point | Above 200°C |
| Boiling point | Above 65°C |
| Solubility in water | Insoluble |
| Composition | Petroleum hydrocarbon(s) 30 to 60%; sulphur 10 to 30%; talc 10 to 30%; vegetable oils 10 to 30%; tallow under 10% |
| Hazard classification | Not classified as hazardous under Safe Work Australia criteria. No signal word, hazard or precautionary statements allocated |
| Dangerous goods | Not classified as a dangerous good (ADG Code, IMDG, IATA). No UN number allocated |
| Warranty | Conditional warranty 5 years from the date of manufacture |
Choosing the right option
This paste is for hand tools and low speed cutting. For cutting, drilling and thread cutting with an aerosol oil, see CRC Trefolex CDT Cutting Oil 300g.
See also: CRC Trefolex CDT Cutting Oil 300g, CRC Trefolex HD Cutting Fluid 500ml.
| Option | Part number | SKU |
|---|---|---|
| 500ml | 3060 | A0088509 |
| 2L | 3061 | A0115628 |
Using it
The paste is strictly for use on hand tools and low speed cutting operations only. Do not use it in operations which will or may generate high temperatures.
The surface of copper and brass is darkened, although the metal suffers no detrimental effect.
Storage and handling
Store in a cool, dry, well ventilated area, away from incompatible substances, heat or ignition sources and foodstuffs.
Limits and safety
For hand tools and low speed cutting operations only. Do not use in operations which will or may generate high temperatures. Copper and brass surfaces darken. It is classed as not hazardous under Safe Work Australia criteria and not a dangerous good. Read the safety data sheet before use.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
CRC Trefolex Cutting Paste: 500ml
SKU: A0088509 | Model: 3060
CRC Trefolex Cutting Paste, 500ml. Green cutting paste for taps, dies, hacksaws and reamers at low speed.