SIT Stainless Steel Crimped End Brush 20mm, 6mm Shaft BP20SS | BP20SS

The SIT BP20SS is a 20 mm crimped stainless steel end brush with a 6 mm shaft that fits a hand drill or die grinder, rated to 18,000 rpm.

Crimped wire is used for surface deburring, polishing and surface preparation, and acts less aggressively than twisted wire. Use a stainless steel brush on stainless steel work, so carbon steel particles are not left on the surface.

Where this product is used

• Surface deburring and polishing
• Tight areas, corners and edges
• Irregular surfaces
• Rust and weld scale removal

Features

• 20 mm crimped stainless steel end brush
• 6 mm shaft, for hand drills and die grinders
• Maximum speed 18,000 rpm
• Crimped wire for surface deburring, polishing and preparation
• Made in Italy
• Suits tight areas, corners and edges

Key specifications

Selecting the right option

Check that the 6 mm shaft suits your drill chuck or die grinder collet. Use a stainless steel brush on stainless steel work, so carbon steel particles are not left on the surface. Match the brush to your machine and do not run it above its maximum speed rating. Wear eye protection and gloves when brushing, because wire can break off during use.

Related products

See also SIT End Brushes, 6mm Shaft - Crimped Steel and Abrasive Nylon, SIT Steel Crimped End Brush 20mm, 6mm Shaft P20 and SIT Steel Crimped End Brush 30mm, 6mm Shaft P30.