Dy-Mark Stencil and colour coding aerosol paint, White

Dy-Mark Spray Ink is a toluene-free aerosol paint made for stencilling and general colour coding, in a 315g can with a matt finish. There are 8 colours. The formulation is made for stencil applications, with reduced spray drift for an accurate spray pattern and less build-up when used on stencils. It is fast drying and lightfast. Drying is slower in cold and humid conditions, without ventilation or under a heavy film.

After spraying, turn the can upside down and spray until only clear gas escapes, so the nozzle does not block. It is classified as an extremely flammable aerosol in a pressurised container that may burst if heated (hazard statements H222 and H229).

Where this product is used

• Stencil marking on a wide range of surfaces
• General colour coding
• Stencil work where paint build-up on the stencil is a concern

Features

• 315g aerosol with a matt finish
• Toluene-free formula
• Formulated to reduce build-up on stencils
• Reduced spray drift for an accurate spray pattern
• Fast drying: touch dry in 10 minutes at 25°C
• Suitable for all surfaces

Key specifications

Choosing the right option

Choose the colour that matches your identification or colour-coding system; the colour is the only difference between the models. Coverage is approximately 3m² per can, or approximately 2 to 3m² by another measure, so treat it as a guide and allow for the surface and overspray. If the job is spot marking and writing rather than stencilling, compare Spray & Mark marking out paint.

Related Dy-Mark products: Spray & Mark marking out paint, the Spray & Mark holster, Dy-Mark zinc stencil sets.