Epirez® Ultra High Build Epoxy Coating (733) 16L
Available
Epirez 733 is a 16L ultra high build epoxy coating that gives a thick-film protective finish on concrete and steel where maximum chemical and abrasion resistance is needed.
Where this product is used
- Concrete and steel surfaces requiring a thick-film protective coating against chemical and abrasion attack.
- Tank lining, bund coating, and secondary containment in chemical processing facilities.
- Surfaces requiring maximum film build in a single coat application.
Key specifications
| Specification | Detail |
|---|---|
| Mix ratio | 1 part hardener : 3 parts compound (by weight or volume) |
| Pot life (25°C) | 30 minutes |
| Tack-free time | 6 hours @ 25°C |
| Initial hardening | 24 hours @ 25°C |
| Compressive strength | 95 MPa |
| Tensile strength | 62 MPa |
| Tensile bond to concrete | Exceeds concrete’s own strength — substrate fails first |
| Coverage rate | 5.3m² per 16L pack @ 3mm DFT, single coat |
| Solids content | 100% (solvent-free, zero VOC) |
| Application temperature | Not below 5°C; store and apply 10–30°C |
| Other | Cures underwater; suitable for salt/fresh water immersion; approved for potable water contact to AS/NZS 4020-2002 |
| Shelf life | 2 years in sealed containers |
| Pack size available | 16L |
Selecting the right option
733 Ultra High Build applies in a single thick coat — use where minimum coats are required. Prime concrete substrates with Epirez epoxy primer sealer to prevent outgassing. Apply by roller or squeegee at the specified spread rate for consistent film thickness.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details

