***Allow one week to make up set.***

Goliath Metric Tap and Drill Intermediate HSS Set

• HSS metric intermediate tap and drill set M3, M4, M5, M6, M8, M10, M12

Contents

Title
Qty
3 x 0.5mm MC Intermediate HSS Tap - Goliath
1
4 x 0.7mm MC Intermediate HSS Tap - Goliath
1
5 x 0.8mm MC Intermediate HSS Tap - Goliath
1
6 x 1mm MC Intermediate HSS Tap - Goliath
1
8 x 1.25mm MC Intermediate HSS Tap - Goliath
1
10 x 1.5mm MC Intermediate HSS Tap - Goliath
1
12 x 1.75mm MC Intermediate HSS Tap - Goliath
1
2.5mm Bright HSS Jobber
1
3.3mm Bright HSS Jobber
1
4.2mm Bright HSS Jobber
1
5mm Bright HSS Jobber
1
6.8mm Bright HSS Jobber
1
8.5mm Bright HSS Jobber
1
10.2mm Bright HSS Jobber
1

About HSS Straight Flute Short Machine and Hand Taps

• These general-purpose taps are ideal for creating new threads in a wide variety of materials.
• Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance, and resistance to micro-chipping, ensuring a long tool life.

About Metric Coarse

• The angle of the thread is 60 degrees. The crest is flat and the thread has clearance at the root allowing the external thread and internal thread to engage well.
• A larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength.
• The major diameter of external thread and pitch is specified by a simple numerical value (most commonly measured in millimeters).

About Intermediate Taps

• Intermediate Taps have a lead of four threads and are used in most general-purpose applications to cut a thread true to a pre-drilled pilot hole.
• Manufactured from HSS this general-purpose tap is designed for use in medium tensile materials and is for hand or general machine use.

About Drill Bit Surface Treatment

• Bright Finish Jobber Drills have no surface treatment and are supplied in the as-ground condition.
• These tools are suitable for general purpose use, particularly for non-ferrous applications.