M8 (1/4" Chain) Grab Hook Clevis Pin, 316 Stainless Steel - GHCA4M8

Made in 316 (A4) stainless steel, the Grab Hook Clevis Pin is a pin used to attach a grab hook to a chain link or clevis.

Supplied in 316 (A4) stainless steel. The molybdenum in A4 gives better resistance to chlorides than A2 (304), so it is the usual choice near the coast, around pools and in marine and food-processing environments.

This listing has 4 variants covering sizes M8 (1/4" Chain) to M16 (1/2" Chain). Each variant is supplied in packs of 5.

Use stainless washers and nuts with stainless fasteners, so the whole joint is made of the same material.

Where this product is used

• Outdoor fittings exposed to salt air
• Attaching a grab hook to a chain or clevis
• Chain shortening and tie-down hardware
• Chemical and washdown areas
• Marine and rigging fittings

Features

• Pin sized to suit a stated chain size
• A4 (316) stainless steel with molybdenum, for coastal and chloride-exposed settings
• Choice of 4 sizes, M8 (1/4" Chain) to M16 (1/2" Chain)
• Pack quantities to suit trade and bulk buying: packs of 5

Key specifications

Selecting the right option

The variants are listed by the chain size they suit (for example 1/4" chain). This is not a lifting rated product, so do not use it for overhead lifting.

Important

This product is not stated as lifting rated in the supplier data. Do not use it to lift or suspend people or loads unless it is marked with a working load limit (WLL). Rigging and lifting hardware should be selected, inspected and used in line with your site procedures and the relevant Australian Standards, and a qualified rigger should be consulted for any lift.