HiKOKI KC18D10P2(HRZ) 18V Brushless Combo Kit, 10 Pieces | AIMS

• DV18DE slide impact driver drill with maximum torque of 70 Nm, RFC function and a 13 mm single-sleeve metal keyless chuck
• WH18DE brushless impact driver with a tightening torque of 175 Nm and a responsive trigger switch
• WR18DH 12.7 mm impact wrench with top-class tightening torque of 345 Nm, auto-stop, auto-slow and IP56 resistance
• CV18DA brushless multi-tool with toolless accessory change and User Vibration Protection (UVP)
• G1813DA 125 mm impact grinder with 146 mm grip circumference, detachable filter and full safety functions
• C1806DB 165 mm brushless circular saw with electric brake, power and silent modes, 4,500 rpm and a 3.3 kg body
• CR18DA reciprocating saw with brushless motor, tool-less blade replacement and tool-less shoe adjustment
• UB18DJL worklight and torch with 12 ultra-bright white LEDs and an adjustable head
• RB18DC blower and vacuum with maximum airflow of 3.5 m³/min and 3-step air volume adjustment
• R18DTC vacuum cleaner with 68 dB operating noise, built-in LED light and extendable pipe
• MultiVolt batteries offer dual voltage (18V and 36V) with Multiplex Protection Circuit and no memory effect

This ten-piece 18V brushless combo kit spans drilling, driving, a 345 Nm impact wrench, sawing, grinding, lighting and cleaning with three MultiVolt batteries and a rapid charger.

Mechanical and Automotive

• Loosening and tightening high-torque bolts with the 345 Nm impact wrench
• Auto-stop and auto-slow functions for controlled fastening on assemblies
• Drilling and driving through brackets and mounts with the impact driver drill
• IP56 dust and water resistance on the impact wrench for workshop conditions

Construction and Building

• Cutting framing timber with the 165 mm brushless circular saw at 4,500 rpm
• Driving structural fasteners with the 175 Nm impact driver
• Demolition and rough cutting with the reciprocating saw
• Lighting up work areas with the LED worklight and torch

Metal Fabrication and Welding

• Grinding and dressing welds with the 125 mm impact grinder
• Cutting steel sections with abrasive discs
• Detail cutting and trimming with the brushless multi-tool

Maintenance and Facilities

• Clearing dust and debris with the blower and vacuum
• Site and workshop cleanup with the low-noise vacuum cleaner
• General fastening, cutting and assembly across plant and buildings
• Toolless accessory and blade changes for quick task switching