HiKOKI NT1865DA(HRZ)18V Brushless 16G 20º Angled Finish | AIMS

This 18V brushless angled finish nailer drives 16 gauge nails from 32 to 65mm with a 20 degree magazine for tight-space access.

Carpentry and Trim Finishing

• Architrave, skirting and casing with 32 to 65mm nails
• 20 degree angled magazine to reach into tight corners
• Selectable full sequential and contact firing
• White LED to light the workpiece

Cabinetry and Joinery

• Cabinet and furniture assembly
• Face frame and panel fixing
• Angled access for inside corners and confined work
• 100-nail magazine for fewer reloads

Maintenance and Mobile Trades

• Cordless finishing away from compressors and hoses
• Steady gasless nailing in cold conditions
• Dry-fire lockout to protect the workpiece at low nail levels
• Two MultiVolt batteries and rapid charger supplied

Renovation and Fit-Out Trades

• Trim and casing on shopfit and office fit-out jobs
• No exhaust odour or explosive report for indoor work
• Stackable case for tidy transport and storage

• Type of power: 18V
• Type of motor: Brushless
• Driving system: Unique Air Drive
• Nail length: 32 to 65 mm
• Driving speed: 3 nails/sec (intermittent)
• Loading capacity: 100 nails
• Firing mode: Full sequential / contact (selectable)
• Fastening series: 16 GA angle
• Magazine angle: 20 degrees
• Applicable nail shank diameter: 1.4 x 1.65 mm
• LED: White LED
• Weight (with BSL36A18 battery): 3.7 kg
• Dimensions (H x L x W): 323 x 310 x 104 mm