Inox MX8 Extreme Pressure Grease Tub 2.5kg

• Prevents scuffing and reduces wear under high and shock load
• Excellent high-shear stability and high-temperature operation
• Resists squeeze-out under load
• Excellent resistance to water washout, even at elevated temperatures
• Will not thin out (shear resistant) or thicken (resists oxidation)
• PTFE increases lubrication and reduces operating temperatures

INOX MX8 performs across heavy-duty bearing and chassis lubrication:

• Automotive wheel bearings, ball, CV and universal joints, tie rods, cables and winches
• Earthmoving wheel bearings, track sprockets and pins, PTO splines
• Commercial mower and forklift bearings, hoist chains, saw mill beds
• Electrical motor, generator and alternator bearings, solenoid shafts
• Bearings sealed-for-life, open, worm and screw drives
• Wider industry aviation, farming, fishing, industrial, marine, mining, shipping and transport

• NLGI grade: 2
• Soap type: lithium complex
• Colour: red
• Texture: smooth and tacky
• Worked penetration at 25C (ASTM D217, 60 strokes): 280 to 305
• Dropping point (ASTM D2265): 240C and above
• Lower operating temperature: -20C
• Water washout at 80C (ASTM D1264): 3.5%
• Timken OK Load (ASTM D2509): 26 kg
• 4-Ball Weld (ASTM IP239): 575 kgf and above
• 4-Ball Wear Scar (ASTM D2266): 0.48 mm
• Base oil viscosity at 40C (ASTM D445): 190 cSt

Certifications
No food grade claim. Specifications are reported against ASTM and IP test methods.