Ko-Ken 13300A 6-point deep impact socket, 7/8"

Ko-Ken 13300A is a 6-point deep impact socket with a 3/8" square drive. Sizes run from 1/4 to 7/8". Length is 80mm.

Where this product is used

• Turning inch nuts and bolts with a 3/8" drive impact wrench
• Nuts on long studs and recessed fasteners where a standard socket will not reach
• General workshop and maintenance fastening

Features

• 3/8" square drive
• 6-point (hexagon) opening
• Deep body
• Retaining pin and O-ring or C-ring parts for each size

Key specifications

Choosing the right option

Match the 3/8" square drive to your impact wrench, then choose the size that fits the fastener. Choose the deep series when a standard socket will not reach the fastener, for example a nut on a long stud. Dimension labels: D1, D2, H1 and H2. Retaining parts for these sockets: pin A31 with O-ring B31 or C-ring C31; pin A32 with O-ring B32 or C-ring C32. The part for each size is shown in its specifications. Select impact sockets only for electric or air impact wrenches, wear safety goggles when using nut runners or impact wrenches, never substitute a hand socket for an impact socket, and replace sockets with cracked walls, battered points or other marks of wear.

Related Ko-Ken products: Ko-Ken 13400A 6-Point Impact Socket, Inch Sizes, 3/8" Drive, Ko-Ken 13300M 6-Point Deep Impact Socket, Metric Sizes, 3/8" Drive, Ko-Ken 13405A 12-Point Impact Socket, Inch Sizes, 3/8" Drive, Ko-Ken 13025-50 Impact Torx Bit Socket, T20 to T55, 3/8" Drive.