Ko-Ken KO3129-32-2 Bolttwister Broken Bolt Remover, 2 mm, 3/8 in Drive
Out of stock
The Ko-Ken 3129-32 is a Bolttwister broken bolt remover with a 3/8 in square drive.
Size is 2 mm.
Length is 32 mm, the dimensions are D1 2, D2 19 mm and weight is 32 g. (manufacturer-stated)
Where this product is used
- Removing a twisted off bolt whose head has come off
- Broken studs and bolts after a pilot hole has been drilled
- Workshop and on-site repair work
Features
- 3/8 in square drive
- Sharp spiral edges hold the broken bolt (manufacturer-stated)
- Selection table printed in the catalogue gives the bolt size and pilot hole drill size for each Bolttwister size (manufacturer-stated)
Key specifications
| Specification | Detail |
|---|---|
| Size | 2 mm |
| Drive | 3/8 in |
| Length | 32 mm (manufacturer-stated) |
| Dimensions | D1 2, D2 19 mm (manufacturer-stated) |
| Bolt size | M5 (manufacturer-stated) |
| Drill size | 2.4 to 2.6 mm (manufacturer-stated) |
| Weight | 32 g (manufacturer-stated) |
Selecting the right option
Choose the Bolttwister size from the selection table: the bolt size and the pilot hole drill size for each size are listed with the specifications. To use it, drill a hole in the centre of the broken bolt, drive the Bolttwister firmly into the hole and turn it counterclockwise until it grips; the sharp spiral edges hold the broken bolt so it can be removed by continuing to turn. (manufacturer-stated)
Related products
Related Ko-Ken products: Ko-Ken 4129-37 and 4129-75 Bolttwister Broken Bolt Remover and Ko-Ken 3405A and 3405W 12-Point Socket, Inch and Whitworth Sizes, 3/8 in Drive.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
