Linishall tapered spindle set for polishing and buffing mops

The Linishall tapered spindle set takes polishing and buffing mops on Linishall 6 inch and 8 inch grinders and other branded grinders. The tapered spindles replace the grinding wheel on a bench grinder so that a polishing or buffing mop can be fitted.

Each set has one spindle for the left and one for the right hand side of the grinder, with a left hand or right hand internal thread to match. Choose the thread size, M12 or M16, to suit the grinder shaft and nut thread size. The spindle is counterbored to fit over the shaft diameter.

Where this product is used

• Fitting polishing and buffing mops to a bench grinder

Features

• Takes polishing and buffing mops on Linishall 6" and 8" and other branded grinders
• Replaces the grinding wheel on a bench grinder
• One left hand and one right hand spindle in each set
• Counterbored to fit over the shaft diameter
• M12 x 130mm and M16 x 145mm sets

Key specifications

Choosing the right option

Match the thread to your grinder: the M12 set is for 150mm (6") grinders and the M16 set for 200mm (8") grinders. The Linishall BG150 150mm (6") bench grinder has an M12 x 1.75 nut thread and the Linishall BG8 bench grinder an M16 x 2.0 thread.

Mops to suit are in the: Linishall polishing mops.