Maun MA1001/05 Imperial Wad Punch Set with Centre Punch, 1/4 to 1 in
Available
The Maun imperial wad punch set is a hollow punch kit for cutting clean holes and shapes in soft materials such as felt, rubber, leather, plastic and cork. Nine punches (1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8 and 1 inch) screw onto one 150 mm handle with a spring-loaded centre punch, and the set comes in a lightweight polypropylene storage box (manufacturer-stated).
The spring-loaded plunger centres the hole and ejects the slug. The punches are ground to a fine cutting edge, then hardened and tempered to HRC 45, and the centre punch is case hardened to HRC 57. The handle and punches are chemically blackened. To use it, screw a punch onto the handle, centre the hole on the plunger and strike the handle with a hammer or mallet, using a wooden block as an anvil (manufacturer-stated). The complete set weighs 910 g and is made in England (manufacturer-stated).
Where this product is used
- Making gaskets and washers, cutting both the inner and outer holes. (manufacturer-stated)
- Cutting precise holes in leather. (manufacturer-stated)
- Cutting felt, rubber, plastic and cork. (manufacturer-stated)
- Making water pump gaskets and washers for vintage vehicles. (manufacturer-stated)
Features
- Nine interchangeable punches on one handle (manufacturer-stated)
- Spring-loaded plunger centres the hole and ejects the slug (manufacturer-stated)
- Punches hardened and tempered to HRC 45 (manufacturer-stated)
- Centre punch case hardened to HRC 57 (manufacturer-stated)
- Chemically blackened handle and punches (manufacturer-stated)
- Lightweight polypropylene storage box (manufacturer-stated)
Key specifications
| Specification | Detail |
|---|---|
| Punch sizes | 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8 and 1 inch (manufacturer-stated) |
| Handle height | 150 mm (manufacturer-stated) |
| Punch hardness | HRC 45 (manufacturer-stated) |
| Centre punch hardness | HRC 57 (manufacturer-stated) |
| Finish | Chemically blackened (manufacturer-stated) |
| Storage | Polypropylene box (manufacturer-stated) |
| Set weight | 910 g (manufacturer-stated) |
| Origin | Made in England (manufacturer-stated) |
Selecting the right option
Choose this imperial set when the hole sizes you need are specified in inches; the Maun metric wad punch set, 5 to 32 mm covers 5 to 32 mm. The metric replacement punches in Maun metric replacement wad punches are for the metric range, so they are not listed for use with this set.
Related products
Related Maun products: Maun metric wad punch set, 5 to 32 mm and Maun metric replacement wad punches.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
