Finer Power max Dynamic Coupling Taper Lock Hub D-4TL
Available
These are taper lock hubs for Max Dynamic couplings, in sizes D-3 to D-80. Max Dynamic couplings are made of two hubs with a polyurethane element between them. The coupling protects the equipment against twist, impact and abrasion, and it is replaced and maintained without oil or grease. The simple structure means the element can be replaced without separating the motor or the connected machine. The polyurethane gives good water and chemical resistance and a very flexible, elastic action, with less noise.
Each hub has a tapered bore that takes a taper lock bush. The bush is machined to your shaft size and keyway, so the hub needs no boring.
Where this product is used
- Pump, fan and blower drives
- Compressor and generator drives
- Conveyor, elevator, crane and hoist drives
- Mixers, agitators and drives in food, brewing, paper, rubber, steel, textile and aggregate plants
Features
- Taper lock hub that takes a separately sold taper lock bush
- Bush series 1008, 1108, 1610, 2012, 2517, 3020, 3535 and 4040
- Polyurethane element with good water and chemical resistance
- Torque, maximum speed, power rating and mass for every size
- Element can be replaced without separating the motor or the machine
Key specifications
| Specification | Detail |
|---|---|
| Sizes | D-3 to D-80 (11 models) |
| Part | Taper lock hub |
| Bore type | Taper lock (bush sold separately) |
| Bush series | 1008, 1108, 1610, 2012, 2517, 3020, 3535, 4040 |
| Torque | 4.2 to 455 kgf.m (about 41 to 4,462 Nm) |
| Maximum speed | 2,000 to 7,500rpm |
| Mass | 0.82 to 37.19kg |
Sizes available
| Coupling | Taper lock bush | Max bore (mm) | Torque (kgf.m) | Max rpm | KW per rpm | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | Mass (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D-3 | 1008 | 25 | 4.2 | 7,500 | 0.0043 | 102 | 22 | 43 | 59 | 87 | 0.82 |
| D-4 | 1008 | 25 | 6.4 | 7,500 | 0.0066 | 116 | 22 | 43 | 66 | 87 | 1.18 |
| D-5 | 1108 | 28 | 11 | 7,500 | 0.011 | 137 | 22 | 56 | 80 | 100 | 1.81 |
| D-10 | 1610 | 35 | 16.7 | 7,500 | 0.017 | 162 | 25 | 52 | 93 | 103 | 2.72 |
| D-20 | 1610 | 42 | 26.7 | 6,600 | 0.027 | 184 | 25 | 63.5 | 114 | 114 | 4.08 |
| D-30 | 2012 | 50 | 42.1 | 5,800 | 0.043 | 210 | 32 | 65 | 138 | 129 | 6.17 |
| D-40 | 2517 | 65 | 63.4 | 5,000 | 0.066 | 241 | 44 | 60 | 168 | 149 | 9.89 |
| D-50 | 2517 | 65 | 88.2 | 4,200 | 0.09 | 279 | 44 | 76 | 207 | 165 | 14.29 |
| D-60 | 3020 | 75 | 144 | 3,800 | 0.148 | 318 | 51 | 84 | 222 | 186 | 21.14 |
| D-70 | 3535 | - | 254 | 3,600 | 0.262 | 356 | 89 | 60 | 235 | 238 | 30.25 |
| D-80 | 4040 | 100 | 455 | 2,000 | 0.467 | 406 | 102 | 95 | 286 | 298 | 37.19 |
Choosing the right option
Choose the size from the torque and the shaft size, and apply a service factor for the type of machine. The torque comes in kgf.m, and one kgf.m is about 9.81 Nm. A complete coupling needs two hubs and one element. The element is Max Dynamic Coupling Polyurethane Element, and bushes are on Metric Taper Lock Bushes, Cast Iron and Imperial Taper Lock Bushes, Cast Iron.
Align the two shafts as closely as you can before fitting the coupling, and check the alignment again once the coupling is fitted. Good alignment gives the longest life, whatever the coupling type.
| Option | Part number | SKU |
|---|---|---|
| 25 / 102 / 59 | D-3TL | A0151070 |
| 25 / 116 / 66 | D-4TL | A0151071 |
| 28 / 137 / 80 | D-5TL | A0151072 |
| 35 / 162 / 93 | D-10TL | A0151073 |
| 42 / 184 / 114 | D-20TL | A0151074 |
| 50 / 210 / 138 | D-30TL | A0151075 |
| 65 / 241 / 168 | D-40TL | A0151076 |
| 65 / 279 / 207 | D-50TL | A0151077 |
| 75 / 318 / 222 | D-60TL | A0151078 |
| 100 / 356 / 235 | D-70TL | A0151079 |
| 100 / 406 / 286 | D-80TL | A0151080 |
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Max Dynamic Coupling Taper Lock Hub, D-3 to D-80: 25 / 116 / 66
SKU: A0151071 | Model: D-4TL
D-4 Max Dynamic coupling taper lock hub, 1008 bush, 25mm max bore, 6.4 kgf.m torque, 1.18kg.

