Hobson Metric Thin Hex Nut, M24

There are 4 Hobson metric thin hex nuts (metric thread, Class 5, hot dip galvanised finish): M20 to M36. A thin hex nut is a low-height version of the hex nut. It is often fitted as a second nut to lock a standard nut in place, or where there is less room for a full-height nut.

These nuts are Class 5. Pitch is the coarse pitch for each diameter.

Where this product is used

• Fitted against a standard hex nut as a second nut on a bolt, stud or threaded rod
• Where there is less room for a full-height nut

Features

• 4 sizes: M20 to M36
• Metric thread, thin hex nut
• Class 5, hot dip galvanised finish
• Pack quantity shown for each item

Key specifications

Choosing the right option

Match the nut to the bolt, stud or rod: thread form, diameter and pitch must all agree. Sizes are the nominal thread diameter in millimetres; compare the pitch with your bolt. A thin nut is lower than a standard hex nut, so check the height your joint allows. Choose the class or grade to suit the bolt you are fastening, and confirm the pairing with your specification if the joint is load-critical.

Related nuts: Hobson Metric Thin Hex Nut, Class 8, Hot Dip Galvanised, M8 to M56, Hobson Metric Thin Hex Nut, Class 8, Zinc Plated, M5 to M36 and Hobson Metric Nylon Thin Hex Nut, Black, UV Stable, M10, Pack of 50.