10mm x 1000mm Morris Extra Long HSS Twist Drill

Morris extra long HSS twist drills give you reach that a standard drill bit cannot. This product covers 10mm to 30mm drills in 1000mm and 1100mm overall lengths. The ET series is most popular with tradesmen and other engineering professionals, and them as general purpose drills for machine and hand held drilling. They suit low and high carbon steels, aluminium and other non-ferrous metals, soft woods, hardwoods, plywoods, chipboards, plastics, composites and plasterboards. They are also suitable for most battery drills.

HSS means high speed steel. Flute length is the length of the spiral cutting section. Sizes from 10mm to 13mm have a 118° split point and a bright finish, which means no surface treatment and an as-ground surface. The split point centres itself and needs less end thrust. Sizes from 13.5mm up have a 118° notched point with a 30° helix and a black steam tempered finish. The notched point starts faster and wanders less. Sizes from 14mm up have 3 milled flats on the chuck end for a non-slip grip in a three jaw chuck. These are the longest of the three length groups, for the deepest holes. Choose your diameter and length from the options above. For less reach, see the 300mm and 500mm drills and the 700mm and 800mm drills, which are sold separately.

Where this product is used

• Drilling mild steel and cast iron
• Drilling aluminium and other non-ferrous metals
• Drilling timber, plywood, chipboard and plastics
• Machine or hand held drilling by tradesmen and engineering professionals
• Drilling across the width of a door for power wires to electric locks, using the Morris mortise jig and MTA adaptor with the 10mm or 12mm x 1100mm drill

Features

• Extra long HSS (high speed steel) twist drills, 10mm to 30mm diameters in 1000mm and 1100mm overall lengths
• General purpose drills for machine and hand held drilling
• Suit low and high carbon steels, aluminium and other non-ferrous metals, soft woods, hardwoods, plywoods, chipboards, plastics, composites and plasterboards
• 10mm to 13mm sizes have a 118° split point, which centres itself and needs less end thrust
• 13.5mm and larger sizes have a 118° notched point with a 30° helix for faster starting and less wander
• 14mm and larger sizes have 3 milled flats on the chuck end for non-slip grip in a three jaw chuck
• Bright finish on 10mm to 13mm sizes and black steam tempered finish on 13.5mm and larger sizes
• Shank size is 10mm, 12mm or 16mm depending on the drill diameter
• Suitable for most battery drills
• Can be re-sharpened on a bench grinder

Key specifications

Supplied with

• The drill bit in the size you choose

Choosing the right option