IKO KT101310C3 Needle Roller Cage, Single Row, 10 x 13 x 10 mm (Fw x Ew x Bc)
Available
This page covers 37 IKO KT needle roller cages: single row needle roller and cage assemblies with a high carbon steel cage, for roller set bore diameters (Fw) of 10 to 45 mm. Choose the size from the drop-downs (outer diameter, width and shaft diameter); each variant has its own dimensions, load ratings, speed and mass in the Model Details.
A needle roller cage holds a set of needle rollers in a rigid, accurately shaped cage that guides each roller. It runs directly between a heat treated, ground shaft and housing bore, so it takes up very little space. The rollers have very small variation in diameter, and the C3 in each part number is the roller diameter classification (mean roller diameter tolerance 0 to -3 µm). It is part of the part number and applies to every size on this page.
KT is the single row type. The double row type is KTW and the synthetic resin cage type adds an N to the part number; neither is on this page.
Where this product is used
- Small spaces, with the cage and rollers running between a heat treated, ground shaft and housing bore
- High speed rotation and shock loads
- General machinery where a compact radial needle roller bearing is needed
Features
- Single row needle roller and cage assembly with a high carbon steel cage (KT type)
- Needle rollers with very small variation in diameter, held in a rigid, accurately shaped cage that guides each roller
- Lightweight, rigid cage with a large lubricant holding capacity
- C3 roller diameter classification: mean needle roller diameter tolerance 0 to -3 µm
- Basic dynamic load rating C 4,160 to 45,400 N and static rating C0 4,550 to 79,000 N (see the Model Details for each size)
- Allowable rotational speed 11,000 to 50,000 rpm with oil lubrication; up to 50% of that value with grease
- Operating temperature range -20 to 120 °C for the high carbon steel cage
Key specifications
| Specification | Detail |
|---|---|
| Type | Needle roller cage, single row, high carbon steel cage (KT) |
| Models | KT101310C3 to KT455320C3 (37 sizes) |
| Roller set bore diameter Fw | 10 to 45 mm |
| Roller set outside diameter Ew | 13 to 53 mm |
| Cage width Bc | 10 to 32 mm (tolerance -0.20 to -0.55 mm) |
| Basic dynamic load rating C | 4,160 to 45,400 N |
| Basic static load rating C0 | 4,550 to 79,000 N |
| Allowable rotational speed | 11,000 to 50,000 rpm with oil lubrication; up to 50% of that value with grease |
| Mass (reference) | 2.3 to 80 g |
| Roller diameter classification | C3 (mean needle roller diameter tolerance 0 to -3 µm) |
| Operating temperature range | -20 to 120 °C (high carbon steel cage) |
| Brand | IKO (Nippon Thompson Co., Ltd., Japan) |
Available sizes
Show all 37 sizes with dimensions, load ratings and speed
| Model | Fw (mm) | Ew (mm) | Bc (mm) | C (N) | C0 (N) | Speed (rpm) | Mass (g) |
|---|---|---|---|---|---|---|---|
| KT101310C3 | 10 | 13 | 10 | 4,160 | 4,550 | 50,000 | 2.3 |
| KT101410C3 | 10 | 14 | 10 | 4,900 | 4,680 | 50,000 | 3.2 |
| KT101415C3 | 10 | 14 | 15 | 7,080 | 7,520 | 50,000 | 4.8 |
| KT121613C3 | 12 | 16 | 13 | 7,020 | 7,800 | 40,000 | 5.2 |
| KT141810C3 | 14 | 18 | 10 | 6,320 | 7,110 | 35,000 | 4.6 |
| KT151917C3 | 15 | 19 | 17 | 10,900 | 14,600 | 35,000 | 8.2 |
| KT172117C3 | 17 | 21 | 17 | 11,800 | 16,900 | 30,000 | 9.3 |
| KT182213C3 | 18 | 22 | 13 | 9,330 | 12,700 | 30,000 | 7.6 |
| KT202413C3 | 20 | 24 | 13 | 9,590 | 13,500 | 25,000 | 8.3 |
| KT202617C3 | 20 | 26 | 17 | 16,800 | 21,200 | 25,000 | 17 |
| KT202620C3 | 20 | 26 | 20 | 18,700 | 24,400 | 25,000 | 20.5 |
| KT202624C3 | 20 | 26 | 24 | 22,500 | 30,900 | 25,000 | 24 |
| KT202820C3 | 20 | 28 | 20 | 21,500 | 24,200 | 25,000 | 29 |
| KT222613C3 | 22 | 26 | 13 | 10,200 | 15,200 | 25,000 | 9.1 |
| KT222617C3 | 22 | 26 | 17 | 13,500 | 21,600 | 25,000 | 11.6 |
| KT222916C3 | 22 | 29 | 16 | 17,600 | 20,900 | 25,000 | 21 |
| KT252910C3 | 25 | 29 | 10 | 8,940 | 13,300 | 20,000 | 7.9 |
| KT252913C3 | 25 | 29 | 13 | 11,100 | 17,600 | 20,000 | 10.3 |
| KT253120C3 | 25 | 31 | 20 | 21,200 | 30,500 | 20,000 | 25 |
| KT253525C3 | 25 | 35 | 25 | 32,500 | 37,900 | 20,000 | 48 |
| KT283327C3 | 28 | 33 | 27 | 26,300 | 47,300 | 18,000 | 29 |
| KT303517C3 | 30 | 35 | 17 | 18,700 | 31,100 | 17,000 | 20 |
| KT303524C3 | 30 | 35 | 24 | 24,900 | 45,100 | 17,000 | 28.5 |
| KT303716C3 | 30 | 37 | 16 | 20,800 | 28,400 | 17,000 | 27.5 |
| KT323717C3 | 32 | 37 | 17 | 19,600 | 33,900 | 16,000 | 21.5 |
| KT354026C3 | 35 | 40 | 26 | 28,700 | 56,800 | 14,000 | 34.5 |
| KT354220C3 | 35 | 42 | 20 | 27,400 | 42,300 | 14,000 | 40.5 |
| KT354230C3 | 35 | 42 | 30 | 40,600 | 70,300 | 14,000 | 59 |
| KT384632C3 | 38 | 46 | 32 | 45,400 | 75,700 | 13,000 | 80 |
| KT404513C3 | 40 | 45 | 13 | 16,800 | 29,800 | 12,000 | 20.5 |
| KT404517C3 | 40 | 45 | 17 | 22,200 | 42,700 | 12,000 | 26.5 |
| KT404527C3 | 40 | 45 | 27 | 32,400 | 69,200 | 12,000 | 41 |
| KT404820C3 | 40 | 48 | 20 | 31,400 | 48,000 | 12,000 | 52.5 |
| KT404825C3 | 40 | 48 | 25 | 39,300 | 64,000 | 12,000 | 64.5 |
| KT455017C3 | 45 | 50 | 17 | 23,300 | 47,100 | 11,000 | 29.5 |
| KT455027C3 | 45 | 50 | 27 | 34,800 | 79,000 | 11,000 | 46 |
| KT455320C3 | 45 | 53 | 20 | 33,200 | 53,300 | 11,000 | 58 |
Speed is the allowable rotational speed with oil lubrication (up to 50% of that value with grease). Mass is a reference value.
Selecting the right option
The drop-downs on this page are outer diameter (the roller set outside diameter Ew), width (the cage width Bc) and shaft diameter (the roller set bore diameter Fw, the shaft size the cage is made for). The part number is KT followed by Fw, Ew and Bc run together, then C3 (for example KT 15 20 10 C3 is a 15 mm roller set bore, 20 mm roller set outside diameter and 10 mm wide cage).
The speed in the Model Details applies to oil lubrication. With grease, the allowable speed is up to 50% of that value.
Fitting and use
For the raceways, a surface hardness of 58 to 64 HRC and a surface roughness of 0.2 µm Ra or less are desirable; 0.8 µm Ra or less can be used when operating conditions are not severe. When the surface hardness is low, the load rating needs a hardness correction.
Recommended fits with a G6 housing bore (shaft sizes up to Fw 68 mm, which covers every size on this page): shaft j5 when high operating accuracy is required or for shock loads and oscillating motion, h5 for general use, and g6 when the temperature is high or mounting errors are large. Where variation in clearance is not a problem, h6 for the shaft and G7 for the housing bore.
Locate the cage axially, for example with circlips on the shaft and in the housing bore. For high rotational speeds, put a heat treated, ground spacer between the cage and the circlip so the cage does not touch the circlip. If you fit two or more cages in tandem on one shaft, use cages with the same classification symbol.
Related products
Where the shaft cannot be hardened and ground, an inner ring can provide the raceway: see the LRT metric inner rings for general usage.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
IKO KT Needle Roller Cages, Single Row, 10 to 45 mm Roller Set Bore (C3): 13 / 10 / 10
SKU: A0156252 | Model: KT101310C3/IKO
IKO KT101310C3 single row needle roller cage, 10 mm roller set bore, 13 mm O.D., 10 mm wide, C 4,160 N.

