Pferd pointed tree burr, 3 x 7mm

It has 2 Pferd pointed tree burrs: shank-mounted tungsten carbide burrs with cut 5, all on a 3mm shank. Head sizes (diameter x cut length) run from 3 x 7 to 3 x 13mm.

The this SPG family is a pointed tree-shaped burr with a flattened tip for general use on all materials, with a good stock removal rate from the matching of tungsten carbide, geometry, cut and coating. The cut 5 is a fine-machining cut for steel, cast iron, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys.

Where this product is used

• Fine machining of steel, cast iron and stainless steel (INOX)
• Fine machining of nickel-based and cobalt-based alloys
• Deburring, chamfering, milling out for build-up welding preparation, machining weld seams and machining contours, and cleaning cast material

Features

• Head sizes (diameter x cut length): 3 x 7 to 3 x 13mm
• 3mm shank
• Cut 5 for fine machining
• Reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity
• Long tool life

Key specifications

Choosing the right option

Match the shank to your tool: this item has a 3mm shank. Choose the head size for the feature you are cutting. A higher cut number is a finer cut:, cut 5 is for fine machining. Never exceed the maximum permitted rotational speed, wear eye protection, hearing protection and a dust mask, and observe the recommended rotational speed, especially with long shanks.

Related burrs: Pferd Pointed Tree Burr SPG, Cut 3 PLUS, 6 x 18 to 12 x 25mm, 6mm Shank, Pferd Pointed Tree Burr SPG 0613/3 Z3 PLUS, 6 x 13mm, 3mm Shank (21222783), Pferd Pointed Tree Burr SPG 0618/6 INOX, 6 x 18mm, 6mm Shank (21122582).