Pferd pointed tree burr, 1/4 x 5/8"

It has 3 Pferd pointed tree burrs: shank-mounted tungsten carbide burrs with cut 3 PLUS, all on a 6.35mm shank. Head sizes (diameter x cut length) run from 1/4 x 5/8 to 1/2 x 1".

The this SPG family is a pointed tree-shaped burr with a flattened tip for general use on all materials, with a good stock removal rate from the matching of tungsten carbide, geometry, cut and coating. The cut 3 PLUS is similar to cut 3 but with a cross cut, for machining steel, cast iron, stainless steel (INOX), nickel-based alloys and titanium alloys.

Where this product is used

• Machining steel, cast iron, stainless steel (INOX), nickel-based alloys and titanium alloys
• High stock removal with good surfaces
• Deburring, chamfering, milling out for build-up welding preparation, machining weld seams and machining contours, and cleaning cast material

Features

• Head sizes (diameter x cut length): 1/4 x 5/8 to 1/2 x 1"
• 6.35mm shank
• Cut 3 PLUS: cross cut, similar to cut 3
• Reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity
• Long tool life

Key specifications

Choosing the right option

Match the shank to your tool: this item has a 6.35mm shank. Choose the head size for the feature you are cutting. Never exceed the maximum permitted rotational speed, wear eye protection, hearing protection and a dust mask, and observe the recommended rotational speed, especially with long shanks.

Related burrs: Pferd Pointed Tree Burr SPG, Cut 3 PLUS, 6 x 18 to 12 x 25mm, 6mm Shank, Pferd Pointed Tree Burr SPG 0613/3 Z3 PLUS, 6 x 13mm, 3mm Shank (21222783), Pferd Pointed Tree Burr SPG, TOUGH Cut, 6.35mm Shank, items SPG 1020/6,35 TOUGH and SPG 1225/6,35 TOUGH.