Pferd 21105076 WRC Cylindrical Radius End Burr 6 x 16 mm, MICRO Cut, 6 mm Shank

The Pferd WRC Cylindrical Radius End Burr is a tungsten carbide burr in MICRO cut with a 6 mm shank (manufacturer-stated). This page lists 2 items, with head sizes of 6 x 16 and 8 x 20 mm (diameter x cut length) and total lengths of 55 to 60 mm.

The catalogue describes the WRC as a cylindrical burr with radius end according to DIN 8032 for fine stock removal (manufacturer-stated).

The MICRO cut gives good stock removal on almost all materials below 68 HRC, with a high surface finish, reduced vibration and less noise (manufacturer-stated).

Special features listed in the catalogue: higher stock removal rate than mounted grinding points, and unlike them no change in geometry through wear; use on almost all materials up to 68 HRC; reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity (manufacturer-stated).

Where this product is used

• Fine stock removal on almost all materials below 68 HRC (manufacturer-stated)
• Finishing work where a high surface finish is wanted (manufacturer-stated)

Features

• MICRO Cut: fine stock removal with a high surface finish (manufacturer-stated)
• Cylindrical head with a radius end, 6 mm shank (manufacturer-stated)
• Head sizes 6 x 16 and 8 x 20 mm; total length 55 to 60 mm (manufacturer-stated)
• Higher stock removal rate than mounted grinding points, and unlike them no change in geometry through wear (manufacturer-stated)
• Use on almost all materials up to 68 HRC (manufacturer-stated)

Common specifications

Key specifications

Each item number is a separate head size; all share the 6 mm shank and MICRO cut.

Selecting the right option

Pick the head size for the job: d1 is the burr diameter and l2 the cut length, and the table shows the total length l1 of each item. Check that your tool holds a 6 mm shank. For heavier stock removal the catalogue lists cut 3 PLUS and the ALLROUND cut (manufacturer-stated). Do not exceed the maximum permitted rotational speed, wear eye protection, hearing protection and a dust mask, and do not use a damaged burr (manufacturer-stated).

Related products

Same cut in other shapes: Pferd ZYA Cylindrical Burr, MICRO Cut, 6 mm Shank, 6 x 16 to 10 x 20 mm. Same shape in other cuts: Pferd WRC Cylindrical Radius End Burr, NON-FERROUS Cut, 6 mm Shank, 6 x 16 and 12 x 25 mm and Pferd WRC Cylindrical Radius End Burr, Cut 3 PLUS, 6 mm Shank, 6 x 16 to 16 x 25 mm.