Pferd SGP Steelox flat cut-off wheel, 1.6mm

It has 2 Pferd SGP Steelox flat cut-off wheels, 180 and 230mm in diameter and 1.6 and 1.9mm thick. The range is a Special Line SGP cut-off wheel for steel and stainless steel (INOX), with high cutting performance.

It has these wheels for cutting thin sheet and profiles in steel and stainless steel (INOX), and cutting out holes. Each item is a flat design EHT (shape 41) wheel in the angle grinders, cutting range. Pferd thin cut-off wheels give fast, thin cuts with minimised burr formation; its width guide counts wheels up to 1.6mm at 50 to 125mm diameter and up to 2.0mm at 150 to 230mm diameter as thin. Suitability for stainless steel (INOX) means the wheel is manufactured without the addition of ferrous, chlorinated or sulphurous fillers.

Where this product is used

• Cutting thin sheet and profiles in steel and stainless steel (INOX), and cutting out holes
• Tool drive: angle grinders, cutting
• The label shows the material or materials each wheel is suitable for

Features

• Diameters 180 and 230mm, thicknesses 1.6 and 1.9mm, 22.23mm bore
• Maximum speed from 6,600 to 8,500rpm depending on diameter
• Flat design EHT (shape 41)
• Wear-resistant bond system described for thin sheet metal and profiles
• Cut-off wheel for steel and stainless steel (INOX) with high cutting performance

Key specifications

Choosing the right option

Choose the diameter to suit your angle grinder and its guard, and the thickness to suit the job. Width guide: 1.6mm at 150 to 230mm diameter and 1.9mm at 150 to 230mm diameter for a universal width with a focus on speed and comfort. Check the Max. RPM for the item against the rated speed of your angle grinder before fitting it. Use a guard, wear eye protection, hearing protection, gloves and a dust mask, follow the safety instructions and not use a damaged tool.

Pferd is a founding member of the Organization for the Safety of Abrasives (oSa). Its grinding tools carry the oSa mark and the EN 12413 standard number for bonded abrasives such as cut-off wheels. Hand-held grinding tools with bond types B and BF, including cut-off wheels, must not be used after the expiry date marked on the label, in accordance with EN 12413; the date is given as month and year. Always observe the instructions on the grinding tool, the grinding machine and all accompanying user information; a tool that cannot be clearly identified should never be used.

Related items: Pferd SGP Steelox Flat Cut-Off Wheel 105 x 0.8mm - Pack of 25, Pferd Ceramic SGP Steel Flat Cut-Off Wheel 125mm, 1.0 and 1.6mm Thick.