Pferd 44890080 High Performance Backing Pad H-GT, 115 mm, M14, Maximum 13,300 rpm

The Pferd H-GT backing pad is a high-performance backing pad for fibre discs, used on a commercially available angle grinder. This page lists 3 items for 115, 125 and 180 mm tool diameters, all with an M14 spindle thread.

The catalogue describes the H-GT backing pad as a high-performance backing pad with a long tool life thanks to abrasion-resistant, glass-fibre-reinforced plastic (manufacturer-stated).

The catalogue says radially arranged cooling fins give particularly cool grinding, and the sturdy, rigid design gives a high fibre-disc stock removal rate (manufacturer-stated).

Where this product is used

• Fitting fibre discs to an angle grinder where a rigid pad and cool grinding are wanted (manufacturer-stated)

Features

• H-GT high-performance backing pad, 115 to 180 mm (manufacturer-stated)
• Abrasion-resistant, glass-fibre-reinforced plastic (manufacturer-stated)
• Radially arranged cooling fins (manufacturer-stated)
• M14 spindle thread; maximum speed from 13,300 rpm (115 mm) down to 8,500 rpm (180 mm) (manufacturer-stated)

Common specifications

Key specifications

Each item number is one tool diameter. Maximum speed depends on the diameter, so each item lists its own.

Selecting the right option

Match the pad to the grinder and disc size. Keep the angle grinder at or below the maximum speed printed for the pad (manufacturer-stated). This pad is for fibre discs; COMBICLICK discs need a COMBICLICK backing pad.

Related products

Other backing pads for fibre discs: Pferd Backing Pad GT for Fibre Discs, 115 to 180 mm and Pferd Backing Pad HT-GT for Fibre Discs, 115 to 180 mm. Discs to use with this pad: Pferd Fibre Disc FS Zirconia Alumina, Slotted, 115 and 125 mm, Grits 24 to 120.