Pferd 43218005 Single-Twist Pencil Brush PBGS 10 x 10 mm, 6 mm Shank

The Pferd PBGS is a single-twist knotted pencil (end) brush. It has a 6 mm shank and stainless steel wire filament. This page lists 3 items, all 10 x 10 mm (brush diameter and cup diameter), in filament diameters of 0.20 mm, 0.35 mm and 0.50 mm.

The catalogue describes the PBGS as suited to special applications that call for a particularly flexible single-knot brush (manufacturer-stated).

Filament diameters are 0.20 mm, 0.35 mm and 0.50 mm. Optimum speed is 4,000 to 6,500 rpm and maximum speed is 10,000 rpm (manufacturer-stated).

Stainless steel wire: no corroding residues left on the workpiece, temperature resistance up to 450°C (manufacturer-stated).

Special features listed in the catalogue: particularly flexible single-knot brush; the knot is less likely to unravel, which gives access to hard-to-reach inside corners (manufacturer-stated).

Where this product is used

• Suited to special applications that call for a particularly flexible single-knot brush (manufacturer-stated)
• Stainless steel wire is rated highly suitable for stainless steel and aluminium, and suitable for steel, soft non-ferrous metals (brass, copper, zinc) and hard non-ferrous metals (manufacturer-stated)
• Access to inside corners (manufacturer-stated)

Features

• Brush diameter and cup diameter: 10 x 10 mm
• 6 mm shank (manufacturer-stated)
• Stainless steel wire (INOX), filament diameters 0.20 mm, 0.35 mm and 0.50 mm (manufacturer-stated)
• Optimum speed 4,000 to 6,500 rpm, maximum speed 10,000 rpm (manufacturer-stated)
• Particularly flexible single-knot brush (manufacturer-stated)
• The knot is less likely to unravel, which gives access to hard-to-reach inside corners (manufacturer-stated)

Common specifications

Key specifications

Each item number is a separate size.

Selecting the right option

Match the 6 mm shank to your chuck or collet. The catalogue gives a recommended cutting speed of 5 to 15 m/s for end brushes, depending on the application and below the maximum permitted speed (manufacturer-stated). Stainless steel wire is rated not suitable for cast iron or plastics (manufacturer-stated). Never exceed the maximum permitted speed marked on the brush, its label and in the catalogue (manufacturer-stated).

Related products

The same single-twist brush in steel wire: Pferd Single-Twist Pencil Brush PBGS, Steel Wire, 10 x 10 mm, 6 mm Shank, 0.35 and 0.50 mm and Pferd Single-Twist Pencil Brush PBGS, Steel Wire 0.20 mm, 10 x 10 mm, 6 mm Shank - Pack of 10.