Pferd 43701005 Shank-Mounted Wheel Brush RBU 30 x 6 mm, 6 mm Shank, Steel Wire 0.20 mm
Available
The Pferd RBU is a shank-mounted crimped wheel brush. It has a 6 mm shank and steel wire filament. This page lists 4 items: 30 x 6 mm, 50 x 15 mm, 70 x 15 mm and 100 x 10 mm (brush diameter and face width).
The catalogue describes the RBU as suited to cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint (manufacturer-stated).
Filament diameters are 0.20 mm and 0.30 mm. Optimum and maximum speeds depend on the size: maximum speeds run from 12,000 to 20,000 rpm, so check the figures for the item you choose (manufacturer-stated).
Steel wire: high tensile and bending fatigue strength, temperature resistance up to 300°C (manufacturer-stated).
Special features listed in the catalogue: highly flexible, so it adjusts to the workpiece contour; creates fine surfaces (manufacturer-stated).
Where this product is used
- Suited to cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint (manufacturer-stated)
- Steel wire is rated highly suitable for steel and cast iron, and suitable for plastics (manufacturer-stated)
Features
- Brush diameter and face width: 30 x 6 mm, 50 x 15 mm, 70 x 15 mm and 100 x 10 mm
- 6 mm shank (manufacturer-stated)
- Steel wire (ST), filament diameters 0.20 mm and 0.30 mm (manufacturer-stated)
- Highly flexible, so it adjusts to the workpiece contour (manufacturer-stated)
- Creates fine surfaces (manufacturer-stated)
Common specifications
| Specification | Detail |
|---|---|
| Sizes (D x WF) | 30 x 6 mm, 50 x 15 mm, 70 x 15 mm and 100 x 10 mm |
| Shank diameter (DS) | 6 mm |
| Filament material | Steel wire (ST) (manufacturer-stated) |
Key specifications
| Model | Designation | Brush diameter (D) | Face width (WF) | Filament length (LT) | Overall length (H) | Filament diameter (DF) | Optimum speed | Maximum speed |
|---|---|---|---|---|---|---|---|---|
| 43701005 | POS RBU 3006/6 ST 0,20 | 30 mm | 6 mm | 7 mm (manufacturer-stated) | 40 mm (manufacturer-stated) | 0.20 mm (manufacturer-stated) | 10,000 to 15,000 rpm (manufacturer-stated) | 20,000 rpm (manufacturer-stated) |
| 43701013 | POS RBU 5015/6 ST 0,20 | 50 mm | 15 mm | 13 mm (manufacturer-stated) | 50 mm (manufacturer-stated) | 0.20 mm (manufacturer-stated) | 7,500 to 11,300 rpm (manufacturer-stated) | 15,000 rpm (manufacturer-stated) |
| 43701017 | POS RBU 7015/6 ST 0,30 | 70 mm | 15 mm | 19 mm (manufacturer-stated) | 50 mm (manufacturer-stated) | 0.30 mm (manufacturer-stated) | 7,500 to 11,300 rpm (manufacturer-stated) | 15,000 rpm (manufacturer-stated) |
| 43701018 | POS RBU 10010/6 ST 0,30 | 100 mm | 10 mm | 25 mm (manufacturer-stated) | 50 mm (manufacturer-stated) | 0.30 mm (manufacturer-stated) | 6,000 to 9,000 rpm (manufacturer-stated) | 12,000 rpm (manufacturer-stated) |
Each item number is a separate size. Speeds are shown for each item.
Selecting the right option
Match the 6 mm shank to your chuck or collet. Larger brushes can have lower speed limits, so read the speed columns in the table for the item you choose. The catalogue gives a recommended cutting speed of 15 to 40 m/s for shank-mounted wheel brushes, depending on the application and below the maximum permitted speed (manufacturer-stated). Steel wire is rated not suitable for stainless steel, aluminium or non-ferrous metals (manufacturer-stated). Never exceed the maximum permitted speed marked on the brush, its label and in the catalogue (manufacturer-stated).
Related products
The same RBU range without the POS prefix, and in stainless steel wire: Pferd Shank-Mounted Wheel Brush RBU, Steel Wire, 6 mm Shank, 20 x 4 to 100 x 10 mm and Pferd Shank-Mounted Wheel Brush RBU, Stainless Steel Wire, 6 mm Shank, 30 x 6 to 100 x 10 mm.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
-
30 x 6 mm
Model Number: 43701005
-
50 x 15 mm
Model Number: 43701013
-
70 x 15 mm
Model Number: 43701017
-
100 x 10 mm
Model Number: 43701018
