Finer Power rapid Shaft Repair Sleeves, 12 / 7

These are rapid shaft repair sleeves in 43 metric sizes, for shaft diameters from 12 to 125mm with widths on the shaft from 5 to 26mm. A sleeve is fitted over the worn seal surface of a shaft, so the shaft does not need to be disassembled or replaced, and the original oil seal size is kept.

Each size has its own part number.

Where this product is used

• Repairing worn oil seal surfaces on shafts
• Seal repairs on pump, gearbox and motor shafts
• Restoring a shaft seal surface without replacing the shaft
• Maintenance repairs where downtime has to be kept short

Features

• Fits over the worn shaft surface, with no shaft disassembly
• Original oil seal dimension retained
• A simple repair that helps keep downtime to a minimum
• 43 metric sizes, shaft diameters 12 to 125mm
• Shaft diameter and width for every part number

Key specifications

Sizes available

Choosing the right option

Measure the shaft at the worn seal surface and choose the sleeve with the matching diameter. Then check the width against the seal width and the length of the worn track.

The imperial sleeves are under Rapid Shaft Repair Sleeves, Imperial Sizes, 12.7 to 154.86mm Shaft.

Clean the shaft and remove any burrs or sharp edges before fitting the sleeve.