Seco 150.10-2.5R6-16 CP600 Parting Off Insert
Available
Genuine Seco Turning 150.10 Parting Off Right Insert (16 Chipbreaker).
Key Specifications
| Grade | CP600 |
|---|---|
| Hand | Right |
| Chipbreaker | 16 |
| Additional Details | The right inserts have a setting angle of 6° in order to eliminate burrs and minimize the parting-off pip left on the workpiece. To reduce pip size with N-inserts, use the smallest width possible. The correct centre height is another major factor to avoid pips (control to ±0.1 mm). When using R-/L-inserts, the feed rate should be reduced by approximately 30%. Convex or concave surfaces will be avoided, when using right or left hand inserts, by reducing the feed rate. Carbide PVD and carbide CVD |
About the 16 Chipbreaker
First choice for steel and cast iron in difficult conditions and/or high feed rates. 20° positive cutting rake angle. Strong protection chamfer.
All About Seco 150.10 Parting Off Insert
Optimized for parting-off applications, the Seco 150.10 consists of a high-speed steel blade that holds the insert and a holder that retains the blade. This setup provides maximum stability, while the hot strength of the high-speed steel ensures the insert will be securely retained especially when the blade is hot. 150.10 is also available in combination with Jetstream Tooling® Duo. A high-pressure cooling system that provides directed coolant to the cutting edge by two streams to rake and clearance surfaces.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
-
150.10-2.5R6-16 CP600
Model Number: 02430486
-
150.10-3R6-16 CP600
Model Number: 02430551
