***Illustrations shown may vary from actual product***
Seco Turning Insert D Shape Code 3.97 x 0.4 x 9.53mm T Insert Type - F1 7° Grade CP600 ± 0.13/± 0.05mm DCMT11T304-F1 Pack of 10
Turning Insert D Shape Code T Insert Type - F1 7° Grade CP600
- D shape code.
- T Insert Type.
- 7° insert side clearance angles.
CP600 Insert Grade
- PVD Coated.
- Very tough micrograin grade intended for stainless steels and steels applicable but generally applicable whenever high edge toughness required e.g. more difficult interrupted cuts.
- (Ti,Al)N + TiN.
F1 Chipbreaker Programme
- Chipbreaker for positive inserts. Positive geometry with a sharp cutting edge gives easy-cutting properties.
- Suitable for high feed rates at fine depths of cut in precision forgings and castings.
- Indicative machining range: f = 0,1-0,5 mm/rev, ap = 0,2-3,0 mm.
- Machining in bar automatics, for instance: f = 0,08-0,25 mm/rev, ap = 1-3 mm.
About Seco Turning Insert
- Anything is possible when it comes to our broad selection of general turning grades and chip breakers.
- Supporting inserts of different shapes, sizes, and thicknesses, we developed each of these solutions with the same goal in mind.
- to boost the productivity and tool life in your turning applications.
- Covering all material groups, this comprehensive range allows you to achieve your goals in terms of material removal rates, tool life, and surface finish.
