Seco Turning Insert V Shape Code 2.38 x 0.4 x 6.35mm T Insert Type - MF2 5° Grade CP600 ± 0.05/± 0.05mm VBMT110204-MF2 Pack of 10

Turning Insert V Shape Code T Insert Type - MF2 5° Grade CP600

• V shape code
• T Insert Type.
• 5° insert side clearance angles.

CP600 Insert Grade

• PVD Coated.
• Very tough micrograin grade intended for stainless steels and steels applicable but generally applicable whenever high edge toughness required e.g. more difficult interrupted cuts.
• (Ti, Al)N + TiN.

MF2 Chipbreaker Programme

• A versatile finishing to semi-finishing chipbreaker with light-cutting action for positive inserts.
• Suitable for a wide range of cuts in steel and stainless steel finishing applications including boring.
• Indicative machining range: f = 0,08–0,50 mm/rev, ap = 0,15–3,00 mm.

About Seco Turning Insert

• Anything is possible when it comes to our broad selection of general turning grades and chip breakers.
• Supporting inserts of different shapes, sizes, and thicknesses, we developed each of these solutions with the same goal in mind.
• to boost the productivity and tool life in your turning applications.
• Covering all material groups, this comprehensive range allows you to achieve your goals in terms of material removal rates, tool life, and surface finish.