Finer Power shaft Collar, 1-1/8"
Available
These are one-piece split clamp type shaft collars in imperial sizes FSC-1/4-CL to FSC-2-CL, for shafts with a bore from 1/4 to 2" (6.35 to 50.8mm). A shaft collar is a ring-shaped component used as a mechanical stop, a locating component or a bearing face. A clamp type collar holds the shaft by clamping, so it does not mar the shaft.
A one-piece collar is a single ring with a slit, which is closed onto the shaft by tightening the clamp screw. It is fitted by sliding it over the end of the shaft.
Where this product is used
- Locating gears, sprockets, pulleys and bearings along a shaft
- Mechanical stops and bearing faces where the shaft must not be marked
- Shaft spacers and positioning collars on machinery
- General machinery assembly and maintenance
Features
- Clamp type collar that does not mar the shaft
- Single point faced
- One-Piece split design
- Steel with a black oxide finish
- 15 imperial sizes, bores 1/4 to 2" (6.35 to 50.8mm)
Key specifications
| Specification | Detail |
|---|---|
| Sizes | FSC-1/4-CL to FSC-2-CL (15 models) |
| Type | One-Piece split clamp type shaft collar |
| Material | Steel, black oxide finish |
| System | Imperial |
| Bore range | 1/4 to 2" (6.35 to 50.8mm) |
| Outside diameter | 0.625 to 3" |
| C | 0.773 to 3.273" |
| Width | 0.281 to 0.688" |
| Width tolerance | +0.003 to -0.010" |
Sizes available
| Part number | Bore (inch) | Bore (mm) | O.D. (inch) | C (inch) | Width (inch) |
|---|---|---|---|---|---|
| FSC-1/4-CL | 1/4 | 6.35 | 0.625 | 0.773 | 0.281 |
| FSC-3/8-CL | 3/8 | 9.52 | 0.875 | 1.027 | 0.343 |
| FSC-1/2-CL | 1/2 | 12.7 | 1.125 | 1.281 | 0.406 |
| FSC-5/8-CL | 5/8 | 15.88 | 1.313 | 1.5 | 0.437 |
| FSC-3/4-CL | 3/4 | 19.05 | 1.5 | 1.808 | 0.5 |
| FSC-7/8-CL | 7/8 | 22.22 | 1.625 | 1.916 | 0.5 |
| FSC-1-CL | 1 | 25.4 | 1.75 | 2.032 | 0.5 |
| FSC-1-1/8-CL | 1-1/8 | 28.57 | 1.875 | 2.14 | 0.5 |
| FSC-1-1/4-CL | 1-1/4 | 31.75 | 2.063 | 2.295 | 0.5 |
| FSC-1-3/8-CL | 1-3/8 | 34.92 | 2.25 | 2.465 | 0.563 |
| FSC-1-1/2-CL | 1-1/2 | 38.1 | 2.375 | 2.578 | 0.563 |
| FSC-1-5/8-CL | 1-5/8 | 41.27 | 2.625 | 2.935 | 0.688 |
| FSC-1-3/4-CL | 1-3/4 | 44.45 | 2.75 | 3.046 | 0.688 |
| FSC-1-7/8-CL | 1-7/8 | 47.62 | 2.875 | 3.16 | 0.688 |
| FSC-2-CL | 2 | 50.8 | 3 | 3.273 | 0.688 |
Choosing the right option
Choose the collar by shaft diameter. C is the overall size across the clamp.
The two-piece version of this collar is on Shaft Collar, Two-Piece Split Clamp Type, Black Oxide Steel, Imperial, FSC-1/4-SP to FSC-2-SP. For a collar that locks with a grub screw, see Shaft Collar, Zinc Plated Steel, Set Screw Type, Imperial, FSC-1/4 to FSC-2 or Shaft Collar, 304 Stainless Steel, Set Screw Type, Imperial, SSFSC-3/8 to SSFSC-2.
Slide the collar onto the shaft, set its position and tighten the clamp screw evenly. Because the collar clamps the shaft, it does not need a grub screw to bite into the surface.
| Option | Part number | SKU |
|---|---|---|
| 1/4 in | FSC-1/4-CL | A0150492 |
| 1/2 in | FSC-1/2-CL | A0150493 |
| 1 in | FSC-1-CL | A0150497 |
| 1-1/2 in | FSC-1-1/2-CL | A0150498 |
| 1-1/4 in | FSC-1-1/4-CL | A0150499 |
| 1-1/8 in | FSC-1-1/8-CL | A0150500 |
| 1-3/4 in | FSC-1-3/4-CL | A0150501 |
| 1-3/8 in | FSC-1-3/8-CL | A0150502 |
| 1-5/8 in | FSC-1-5/8-CL | A0150503 |
| 1-7/8 in | FSC-1-7/8-CL | A0150504 |
| 2 in | FSC-2-CL | A0150505 |
| 3/8 in | FSC-3/8-CL | A0150491 |
| 3/4 in | FSC-3/4-CL | A0150494 |
| 5/8 in | FSC-5/8-CL | A0150495 |
| 7/8 in | FSC-7/8-CL | A0150496 |
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Shaft Collar, One-Piece Split Clamp Type, Black Oxide Steel, Imperial, FSC-1/4-CL to FSC-2-CL: 1-1/8 in
SKU: A0150500 | Model: FSC-1-1/8-CL
FSC-1-1/8-CL one-piece split clamp type shaft collar, black oxide steel, 1-1/8" bore, 1.875" outside diameter.

