Koyo HK2016 drawn cup needle roller bearing, 20 x 26 x 16 mm
Available
These Koyo HK drawn cup needle roller bearings have caged needle rollers in a drawn steel cup with open ends. Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn steel outer cup that serves as the raceway for the needle rollers. The small cross-section gives high load-carrying capability in minimum space, and the bearing is installed with a press fit in the housing.
Drawn cup bearings suit compact, economical designs where it is not practical to harden and grind the housing bore, or where the housing material has low rigidity, such as cast iron, aluminium or plastics. The one-piece steel cage is designed to provide rigidity and minimise wear, and it separates the roller guiding and roller retention functions. Caged drawn cup bearings give high speed capability and maximum lubricant retention.
The range has 58 metric sizes with needle roller complement bore diameters from 3 to 60 mm. Koyo bearings are made by JTEKT Corporation.
Where this product is used
- Transmissions and transfer cases
- Engines and valve trains
- Steering and braking systems
- Axle supports
- Outboard engines
- Power tools
- Copiers, fax machines and paper-moving equipment
- Appliances
Features
- Caged needle rollers in a one-piece steel cage: high speed capability and maximum lubricant retention
- Drawn steel cup raceway pressed into the housing: compact cross-section and economical mounting without a hardened, ground housing bore
- Basic dynamic load rating C 1.2 to 38.4 kN and basic static load rating C0 0.78 to 79.2 kN
- Grease lubrication speed rating 3,400 to 30,000 min-1
- Matching JR series inner rings are available in the Koyo range where the shaft cannot be hardened and ground
Key specifications
| Specification | Detail |
|---|---|
| Type | Caged needle rollers, open ends |
| Series | Metric |
| Needle roller complement bore diameter Fw | 3 to 60 mm |
| Outside diameter D | 6.5 to 68 mm |
| Width C | 6 to 38 mm |
| Basic dynamic load rating C | 1.2 to 38.4 kN |
| Basic static load rating C0 | 0.78 to 79.2 kN |
| Speed rating, grease lubrication | 3,400 to 30,000 min-1 |
| Approximate weight | 0.001 to 0.092 kg |
| Brand | Koyo (JTEKT) |
Available sizes
Show all 58 sizes
| Designation | Fw (mm) | D (mm) | Width C (mm) | C (kN) | C0 (kN) | Speed, grease (min-1) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| HK0306 | 3 | 6.5 | 6 | 1.2 | 0.78 | 30,000 | 0.001 |
| HK0408 | 4 | 8 | 8 | 1.88 | 1.38 | 25,000 | 0.002 |
| HK0509 | 5 | 9 | 9 | 2.52 | 2.07 | 23,000 | 0.002 |
| HK0608 | 6 | 10 | 8 | 2.34 | 1.95 | 22,000 | 0.002 |
| HK0609 | 6 | 10 | 9 | 3.14 | 2.85 | 22,000 | 0.002 |
| HK0709 | 7 | 11 | 9 | 3.23 | 3.05 | 21,000 | 0.003 |
| HK0808 | 8 | 12 | 8 | 2.9 | 2.73 | 20,000 | 0.003 |
| HK0810 | 8 | 12 | 10 | 3.95 | 4.07 | 20,000 | 0.004 |
| HK0910 | 9 | 13 | 10 | 4.57 | 5.07 | 19,000 | 0.004 |
| HK0912 | 9 | 13 | 12 | 5.65 | 6.65 | 19,000 | 0.005 |
| HK1010 | 10 | 14 | 10 | 4.78 | 5.51 | 19,000 | 0.004 |
| HK1012 | 10 | 14 | 12 | 5.9 | 7.23 | 19,000 | 0.005 |
| HK1015 | 10 | 14 | 15 | 7.49 | 9.81 | 19,000 | 0.006 |
| HK1210 | 12 | 16 | 10 | 5.24 | 6.55 | 18,000 | 0.006 |
| HK1212 | 12 | 18 | 12 | 6.61 | 7.29 | 14,000 | 0.01 |
| HK1312 | 13 | 19 | 12 | 6.92 | 7.89 | 14,000 | 0.01 |
| HK1412 | 14 | 20 | 12 | 7.21 | 8.5 | 14,000 | 0.011 |
| HK1512 | 15 | 21 | 12 | 7.49 | 9.11 | 14,000 | 0.012 |
| HK1516 | 15 | 21 | 16 | 10.7 | 14.4 | 14,000 | 0.018 |
| HK1522 | 15 | 21 | 22 | 13.5 | 19.4 | 14,000 | 0.024 |
| HK1612 | 16 | 22 | 12 | 7.76 | 9.72 | 14,000 | 0.012 |
| HK1616 | 16 | 22 | 16 | 11.1 | 15.3 | 14,000 | 0.016 |
| HK1622 | 16 | 22 | 22 | 13.4 | 19.5 | 14,000 | 0.022 |
| HK1712 | 17 | 23 | 12 | 8.12 | 10.4 | 13,000 | 0.013 |
| HK1812 | 18 | 24 | 12 | 8.41 | 11.1 | 12,000 | 0.015 |
| HK1816 | 18 | 24 | 16 | 11.6 | 16.8 | 12,000 | 0.018 |
| HK2012 | 20 | 26 | 12 | 8.97 | 12.5 | 11,000 | 0.015 |
| HK2016 | 20 | 26 | 16 | 12.4 | 18.9 | 11,000 | 0.022 |
| HK2020 | 20 | 26 | 20 | 15.5 | 25.3 | 11,000 | 0.025 |
| HK2030 | 20 | 26 | 30 | 21.2 | 37.8 | 11,000 | 0.041 |
| HK2212 | 22 | 28 | 12 | 9.81 | 14.5 | 9,600 | 0.015 |
| HK2216 | 22 | 28 | 16 | 13.1 | 20.9 | 9,600 | 0.022 |
| HK2220 | 22 | 28 | 20 | 15.3 | 25.5 | 9,600 | 0.026 |
| HK2512 | 25 | 32 | 12 | 10.9 | 14.7 | 8,500 | 0.021 |
| HK2516 | 25 | 32 | 16 | 15.6 | 23.5 | 8,500 | 0.028 |
| HK2520 | 25 | 32 | 20 | 20.6 | 33.4 | 8,500 | 0.04 |
| HK2526 | 25 | 32 | 26 | 25.7 | 44.4 | 8,500 | 0.046 |
| HK2538 | 25 | 32 | 38 | 35.3 | 66.9 | 8,500 | 0.068 |
| HK2816 | 28 | 35 | 16 | 17.4 | 28.1 | 7,500 | 0.032 |
| HK2820 | 28 | 35 | 20 | 20.9 | 35.3 | 7,500 | 0.04 |
| HK3012 | 30 | 37 | 12 | 12 | 17.7 | 7,000 | 0.024 |
| HK3016 | 30 | 37 | 16 | 16.8 | 27.3 | 7,000 | 0.032 |
| HK3020 | 30 | 37 | 20 | 22.4 | 39.6 | 7,000 | 0.042 |
| HK3026 | 30 | 37 | 26 | 27.4 | 51.2 | 7,000 | 0.054 |
| HK3038 | 30 | 37 | 38 | 38.4 | 79.2 | 7,000 | 0.075 |
| HK3512 | 35 | 42 | 12 | 12.3 | 19.2 | 5,900 | 0.028 |
| HK3516 | 35 | 42 | 16 | 18.7 | 33 | 5,900 | 0.037 |
| HK3520 | 35 | 42 | 20 | 24.5 | 46.8 | 5,900 | 0.049 |
| HK4012 | 40 | 47 | 12 | 13.4 | 22.4 | 5,200 | 0.033 |
| HK4016 | 40 | 47 | 16 | 18.9 | 34.8 | 5,200 | 0.042 |
| HK4020 | 40 | 47 | 20 | 25.1 | 50.4 | 5,200 | 0.06 |
| HK4512 | 45 | 52 | 12 | 14.1 | 24.8 | 4,600 | 0.036 |
| HK4516 | 45 | 52 | 16 | 19.8 | 38.5 | 4,600 | 0.048 |
| HK4520 | 45 | 52 | 20 | 27.2 | 58.2 | 4,600 | 0.059 |
| HK5020 | 50 | 58 | 20 | 30.9 | 62.2 | 4,100 | 0.072 |
| HK5025 | 50 | 58 | 25 | 35.5 | 74.1 | 4,100 | 0.092 |
| HK5520 | 55 | 63 | 20 | 31 | 64.4 | 3,700 | 0.079 |
| HK6012 | 60 | 68 | 12 | 18.6 | 34.4 | 3,400 | 0.06 |
Selecting the right option
Choose the size from the shaft (the needle roller complement bore diameter Fw), the housing bore (outside diameter D) and the width C. Use the BK series where the bearing sits at a shaft end and needs a closed end, and the HK RS or HK.2RS series where the bearing must retain grease or keep contaminants out.
Drawn cup needle roller bearings accommodate radial loads only. The maximum dynamic radial load P should be less than Cr/3, where Cr is the basic dynamic load rating, and the static load safety factor f0 (C0 divided by the maximum applied static load P0) should be greater than 3.
Sizes with two needle roller and cage assemblies carry a lubricating hole in the outer ring; the variant specification identifies them.
Fitting and use
For a one-piece heavy-section steel or cast iron housing, the catalogue recommends a shaft tolerance of h5 (or h6) and a housing bore tolerance of N6 (or N7). For housings of low rigidity, use R6 (or R7) for the housing bore. Where the outer ring rotates relative to the load, use f5 (or f6) for the shaft and R6 (or R7) for the housing bore, and for oscillating motion use j5 (or j6) for the shaft. The shaft surface should be 58 HRC or equivalent.
Press the bearing into the housing with an installation tool used with a standard press. The tool must be coaxial with the housing bore, and the stamped end of the bearing (the end with the identification markings) goes against the angled shoulder of the tool. Do not hammer the bearing into place, even with a mandrel, and do not press it tightly against a shoulder.
Do not inspect an unmounted drawn cup bearing by measuring its outside diameter, because the thin cup can go out of round during heat treatment and becomes round and correctly sized when pressed into a true housing or ring gage. Remove a bearing by pushing it through a straight housing, and do not reuse it after extraction.
Where the shaft cannot meet the raceway hardness, case depth and surface finish requirements, use a Koyo JR series inner ring with a loose transition fit on the shaft (g5), clamped against a shoulder.
Related products
Also available from Koyo: the Koyo BK drawn cup bearing range, the Koyo HK RS sealed drawn cup bearing range, the Koyo HK.2RS sealed drawn cup bearing range and the Koyo B drawn cup bearing range.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Koyo HK Drawn Cup Needle Roller Bearing, Caged, Open Ends, Metric Series (3 to 60 mm Bore): 26 mm / 16
SKU: A0157198 | Model: HK2016/KOYO
Koyo HK2016 drawn cup needle roller bearing, 20 x 26 x 16 mm, C 12.4 kN.

