SIT crimped brass wire wheel, Max RMP 4500

These SIT wire wheels have crimped brass wire and a multi bore for a bench grinder. They come in 2 sizes: 200 x 29mm and 150 x 27mm.

Crimped wire is used for surface deburring, polishing and surface preparation, and acts less aggressively than twisted wire. Brass wire is softer than steel wire, which makes it a lighter-duty choice for deburring, polishing and cleaning. The multi bore takes 1", 3/4", 5/8" and 1/2" arbors.

Where this product is used

• Surface deburring and polishing
• Rust, glue, rubber and residue removal from metal surfaces
• Weld cleaning
• Workshop and maintenance cleaning

Features

• Available in 2 sizes: 200 x 29mm and 150 x 27mm
• Mounting: multi bore, for bench grinders
• Maximum speed 4,500 to 6,000rpm, by size
• Crimped wire for surface deburring, polishing and preparation
• Made in Italy
• Can be fitted on selected bench machines
• Multi bore sizes: 1", 3/4", 5/8" and 1/2"
• It is a anti-spark wheel brush

Key specifications

Choosing the right option

Check that the bore, or the multi-bore sizes, suit the arbor on your machine, and that the wheel width fits inside the guard. Match the brush to your machine and do not run it above its maximum speed rating. Wear eye protection and gloves when brushing, because wire can break off during use. Check site rules before using any wire brush where flammable gas or dust may be present.

See also: SIT Steel Crimped Wire Wheel, Multi Bore - 150mm to 250mm, SIT Stainless Steel Crimped Wire Wheel, Multi Bore - 150mm and 200mm, SIT Steel Crimped Wire Wheel 200 x 36mm, Multi Bore 4204.