Sutton #30 (3.26mm) Blue Bullet Panel Drill Tupoint - HSS
The price shown is for the pack.
Available
The Sutton D125 Blue Bullet panel drill is a double-ended HSS drill with a blue steam-oxide finish, a 135° standard point and a rigid design for through-hole drilling. It is made for rivet holes in sheet metal fabrication, in 4 sizes from Ø3.18 mm to Ø4.85 mm. Both ends of the drill are cut as drill points.
Panel drills are for shallow holes no deeper than 1-1/4 × the drill diameter (d1). Tupoint drills require fully tightened chuck jaws. Supplied in packs of 10.
Where this product is used
- Rivet holes in sheet metal fabrication, flat and curved panels.
- Through-hole drilling in thin material, within the 1-1/4 × d1 depth limit.
- Designation: Ferrous materials.
- Materials rated Optimal: non-alloy steel, about 0.15 %C, annealed; non-alloy steel, about 0.45 %C, annealed; non-alloy steel, about 0.45 %C, quenched and tempered (250 HB); and low-alloy steel (under 5% alloying elements), annealed.
- Also rated Effective: non-alloy steel, about 0.75 %C (annealed and quenched and tempered) (some grades); low-alloy steel, quenched and tempered (275 to 350 HB) (some grades); high-alloy and tool steel; austenitic stainless steel; duplex stainless steel; grey cast iron (some grades); nodular cast iron (some grades); and chilled cast iron.
Finish
Blue (steam oxide). The blue steam-oxide finish is for ferrous metals: it helps prevent chip build-up on the cutting edges (especially in carbon steels), the oxide layer protects the surface and it carries lubricant well.
Sizes and rivet sizes
Each size is matched to the rivet it suits. Sizes in this range:
| Item | Ø d1 | Gauge / inch | Overall l1 (mm) | Flute l2 (mm) | Shank Ø d2 (mm) | Rivet size (mm) |
|---|---|---|---|---|---|---|
| D125 0318 | 3.18 mm | 1/8 | 54 | 19 | 3.18 | 3.00 |
| D125 0326 | 3.26 mm | #30 | 54 | 19 | 3.26 | 3.18 (1/8") |
| D125 0409 | 4.09 mm | #20 | 54 | 22 | 4.09 | 3.97 (5/32") |
| D125 0485 | 4.85 mm | #11 | 54 | 22 | 4.85 | 4.76 (3/16") |
Accuracy
Sutton drills are ground to an h8 diameter tolerance (nominal or smaller, never larger).
Key specifications
| Specification | Detail |
|---|---|
| Catalogue code | D125 |
| Range name | Blue Bullet Tupoint panel drill |
| Ends | double-ended |
| Material | High Speed Steel (HSS) |
| Finish | Blue (steam oxide) |
| Point | 135° standard point |
| Diameter tolerance | h8 |
| Depth limit | No deeper than 1-1/4 × d1 |
| Sizes | 4 sizes, Ø3.18 to Ø4.85 mm |
Related drilling products
Other panel drills: Panel Drill Bit Sets collection. For standard hole sizes see the Jobber Drill Bits collection, and for spotting or starting holes see the Centre Drill Bit Sets. Our cutting tool troubleshooting guide covers drilling problems and fixes.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Sutton D125 Panel Drill Bit - Tupoint - HSS: #30
SKU: A0004257 | Model: D1250326
Diameter (inch or gauge) #30. Description
The Sutton D125 Blue Bullet panel drill is a double-ended HSS drill with a blue steam-oxide finish, a 135° standard point and a rigid design for through-hole drilling. It is made for rivet holes in sheet metal fabrication, in 4 sizes from Ø3.18 mm to Ø4.85 mm. Both ends of the drill are cut as drill points.
Panel drills are for shallow holes no deeper than 1-1/4 × the drill diameter (d1). Tupoint drills require fully tightened chuck jaws.

