Skip to content

Turning Insert CNMG Insert Style - MR4 Grade TS2500: CNMG160608-MR4 TS2500

SKU: A0118325 | Model: 02615959

Seco Turning Insert C Shape Code 6.35 x 0.8 x 15.88mm G Insert Type - MR4 Grade TS2500 ± 0.13/± 0.05mm Tolerance CNMG160608-MR4,TS2500 10pcs

Turning Insert CNMG Insert Style - MR4 Grade TS2500

C shape code.

G insert type, with hole and chip breaker on both faces.

TS2500 insert grade.

TS2500 Insert Grade

Relatively hard micrograin grade for machining of superalloys and titanium in roughing applications and due to its design also applicable in a wide range of materials such as stainless steel.

(Ti, Al)N + TiN

MR4 Chipbreaker Programme

The MR4 has a negative T-land, which gives extremely high edge strength.

The chip breaker is intended for more difficult machining applications on superalloys and titanium alloys, such as intermittent cuts and the machining of parts with the raw surface.

Indicative machining range: f = 0,15–0,50 mm/rev, ap = 1,5–7,0 mm.

About Seco Turning Insert

Anything is possible when it comes to our broad selection of general turning grades and chip breakers.

Supporting inserts of different shapes, sizes, and thicknesses, we developed each of these solutions with the same goal in mind.

to boost the productivity and tool life in your turning applications.

Covering all material groups, this comprehensive range allows you to achieve your goals in terms of material removal rates, tool life, and surface finish.

Quote Cart