Finer Power two Piece Split Clamp Rigid Coupling, 1-3/4
Available
These are two-piece split rigid couplings, clamp type, imperial, in sizes SPX-4-4 to SPX-32-32 with bores of 1/4 to 2". Clamp style rigid couplings wrap around the shaft and give high torsional holding power without the shaft damage and fretting that occurs when set screw style couplings are used.
The two-piece clamp style also allows disassembly and maintenance without removing other machine components, and it uses opposing hardware for a balanced design.
Where this product is used
- Joining two shafts of the same diameter end to end
- Joining small and medium shafts in drives and machinery
- Light drives where a rigid connection is needed
- Replacing set screw couplings where shaft damage and fretting are a concern
Features
- Clamp type rigid coupling with high torsional holding power
- No set screw damage or fretting on the shaft
- Two-piece split design, with balanced opposing hardware and easy disassembly
- Imperial sizes, bores 1/4 to 2"
- A, B and C dimensions for every size
Key specifications
| Specification | Detail |
|---|---|
| Sizes | SPX-4-4 to SPX-32-32 (13 models) |
| Type | Clamp type rigid coupling, two piece split |
| System | Imperial |
| Bore range | 1/4 to 2" |
| A | 15.9 to 85.7mm |
| B | 25.4 to 123.8mm |
| C | 20.7 to 94.4mm |
Sizes available
| Part number | Bore (inch) | Bore (mm) | A (mm) | B (mm) | C (mm) | Split pieces |
|---|---|---|---|---|---|---|
| SPX-4-4 | 1/4 | 6.4 | 15.9 | 25.4 | 20.7 | 2 |
| SPX-6-6 | 3/8 | 9.5 | 22.2 | 34.9 | 26.2 | 2 |
| SPX-8-8 | 1/2 | 12.7 | 28.6 | 44.5 | 33.7 | 2 |
| SPX-10-10 | 5/8 | 15.9 | 33.3 | 50.8 | 38.5 | 2 |
| SPX-12-12 | 3/4 | 19.1 | 38.1 | 57.2 | 46.8 | 2 |
| SPX-14-14 | 7/8 | 22.2 | 41.3 | 63.5 | 49.1 | 2 |
| SPX-16-16 | 1 | 25.4 | 44.5 | 76.2 | 52 | 2 |
| SPX-18-18 | 1-1/8 | 28.6 | 47.6 | 79.4 | 55.4 | 2 |
| SPX-20-20 | 1-1/4 | 31.8 | 52.4 | 82.6 | 58.1 | 2 |
| SPX-22-22 | 1-3/8 | 34.9 | 63.5 | 92.1 | 70.4 | 2 |
| SPX-24-24 | 1-1/2 | 38.1 | 66.7 | 98.4 | 73.3 | 2 |
| SPX-28-28 | 1-3/4 | 44.5 | 79.4 | 114.3 | 85.5 | 2 |
| SPX-32-32 | 2 | 50.8 | 85.7 | 123.8 | 94.4 | 2 |
Choosing the right option
Choose the bore to match the shaft.
Fit the coupling over both shaft ends with the shafts aligned, and tighten the clamp screws evenly. Align the two shafts as closely as you can before fitting the coupling, and check the alignment again once the coupling is fitted. Good alignment gives the longest life, whatever the coupling type.
| Option | Part number | SKU |
|---|---|---|
| 1/4 | SPX-4-4 | A0150959 |
| 1/2 | SPX-8-8 | A0150961 |
| 1 | SPX-16-16 | A0150965 |
| 2 | SPX-32-32 | A0150971 |
| 3/8 | SPX-6-6 | A0150960 |
| 3/4 | SPX-12-12 | A0150963 |
| 1-1/2 | SPX-24-24 | A0150969 |
| 5/8 | SPX-10-10 | A0150962 |
| 1-1/4 | SPX-20-20 | A0150967 |
| 7/8 | SPX-14-14 | A0150964 |
| 1-3/4 | SPX-28-28 | A0150970 |
| 1-1/8 | SPX-18-18 | A0150966 |
| 1-3/8 | SPX-22-22 | A0150968 |
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Two Piece Split Rigid Coupling, Clamp Type, Imperial, SPX-4-4 to SPX-32-32: 1-3/4
SKU: A0150970 | Model: SPX-28-28
SPX-28-28 two piece split clamp type rigid coupling, 1-3/4" (44.5mm) bore.

