Typhoon Tools 1/2" Drive 10-27mm Standard & Deep Impact Socket Set, 28 Pcs

The Typhoon Tools 72506 is a 28 piece impact socket set with a 1/2" drive. It has 14 metric sizes from 10mm to 27mm, each in both standard and deep length. That means 14 standard sockets for easy-to-reach nuts and 14 deep sockets for nuts on long studs, in the one set. Impact sockets are built for impact wrenches and air tools. They are made from chromium-molybdenum steel (Cr-Mo) with thick walls to absorb shock, and a black phosphate finish that resists corrosion. Each socket has retention holes and grooves for retaining rings. A ring clips the socket onto the anvil of the impact tool so it stays put.

Standard sockets are 38mm long up to 22mm and 43mm for 27mm. Deep sockets are 80mm long. If you only need one length, the 14 piece sets 72500 (standard) and 72501 (deep) cover the same sizes. The 20 piece set (72542) goes up to 36mm in standard length. Always wear eye protection when using impact equipment, and do not hold the socket while it is working.

Where this product is used

• Impact wrench work on both easy-to-reach and recessed nuts and bolts
• Automotive, truck and machinery maintenance
• Workshop and site work with air or cordless impact tools

Features

• 28 piece 1/2" drive set with standard and deep sockets
• Metric sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 and 27mm, each in standard and deep
• Standard sockets 38mm long up to 22mm and 43mm for 27mm, deep sockets 80mm long
• Torque rate of 153 N.m at 10mm, rising to 570 N.m from 21mm up
• Impact rated design, built to withstand high torque and vibration from impact tools
• Chromium-molybdenum steel (Cr-Mo) for strength, toughness and wear resistance
• Thick socket walls absorb and dissipate shock, which reduces the chance of socket failure
• Black phosphate finish is a corrosion resistant coating that extends tool life
• Precision machined for a tight tolerance fit on fasteners, which reduces wear on the anvil, socket and fastener
• Retention holes and grooves for retaining rings that keep the socket on the impact tool anvil

Key specifications

Supplied with

• 14 standard length 1/2" drive metric impact sockets, 10 to 27mm
• 14 deep length 1/2" drive metric impact sockets, 10 to 27mm