Boston Aerosol Spray Range — Quick Reference
Boston manufactures aerosol spray paints + protective coatings for industrial maintenance + repair + touch-up. Fast-drying primers + zinc-rich cold galvanising sprays. AU industrial aerosol supply.
| Boston Product | Best For |
|---|---|
| Aerosol Primer (Etch + Filler) | Bare metal preparation + paint adhesion base |
| Cold Galvanising Spray (Zinc-Rich) | Galvanising repair after welding/cutting + cathodic protection |
| Industrial Aerosol Paint (Topcoat) | Equipment touch-up + machinery refresh |
| Aerosol Lacquer / Clear Coat | Final clear protective + finish |
| Specialty Aerosols (Anti-Spatter etc) | Specific industrial applications |
| High-Temp Aerosol Paint | Exhaust + heat-exposed equipment |
| Anti-Corrosion Aerosol | Quick rust prevention + outdoor storage |
Cold galvanising: Boston cold galv sprays should contain ≥90% zinc by weight in dried film to provide effective cathodic protection per AS/NZS 4680. Verify zinc content on label. Surface prep mandatory — clean dry abraded steel. Apply even coats. Brand: Boston. Companion: aerosols, specialty paint + coatings, Galmet, Dy-Mark.
Boston Aerosol Primers & Cold Galvanising Spray
Boston manufactures aerosol spray paints and protective coatings formulated for industrial maintenance, repair and touch-up applications. Their fast-drying primers and zinc-rich cold galvanising sprays provide corrosion protection and surface preparation in a convenient aerosol format.
AIMS Industrial stocks Boston spray paints for Australia-wide delivery to maintenance teams, fabrication shops and facilities management operations.
Buy Boston spray paints at AIMS Industrial alongside our Paints & Coatings, Removers & Thinners and Dy-Mark collections.
Order online, Contact our team for assistance or to Request a quote.
People Also Ask — Boston
Q: What's Boston's aerosol primer used for?
Boston's aerosol primer (etch and filler) prepares bare metal and gives the topcoat an adhesion base to bond to — priming before painting rather than applying colour coat directly to bare metal.
Q: When would I use Boston's high-temperature aerosol paint instead of a standard topcoat?
For exhaust and other heat-exposed equipment, where a standard industrial topcoat wouldn't hold up to the sustained heat the high-temp formulation is rated for.
Q: When would I use Boston's cold galvanising spray?
For touching up galvanised steel where the zinc coating has been damaged or burned away — typically after welding or cutting a galvanised component — restoring corrosion protection to that specific area rather than needing to re-galvanise the whole part.
Q: What's the difference between Boston's industrial aerosol paint and their aerosol lacquer or clear coat?
The industrial aerosol paint is the topcoat itself, used for equipment touch-up and machinery refresh. The aerosol lacquer/clear coat goes over that as a final clear protective finish, rather than being a colour coat in its own right.
Q: What's Boston's anti-corrosion aerosol used for?
Quick rust prevention on equipment going into outdoor storage — a fast protective step rather than a full repaint or a cold-galvanising repair.