Buy Hoses Online in Australia
Industrial Hose Selection — Quick Reference
Industrial hose selection matches HOSE CONSTRUCTION + PRESSURE RATING + CHEMICAL COMPATIBILITY to specific application. Hose suitable for compressed air can be entirely WRONG for hydraulic high-pressure or chemical transfer — even at same bore diameter.
| Hose Type | Best For | Pressure / Temp |
|---|---|---|
| PVC Air Hose | Compressed air — workshop pneumatic tools | 10-20 bar / -10 to 60°C |
| Polyurethane (PU) Air Hose | Lighter + better flex than PVC | 10-15 bar / -20 to 60°C |
| Rubber Multi-Purpose Hose | Heavy-duty + abrasive + outdoor air/water | 20 bar / -30 to 80°C |
| Water Hose (Garden / Industrial) | Workshop + washdown + garden water supply | 8-15 bar mains |
| Diesel + Oil Transfer Hose | Fuel + oil dispensing — NBR rubber | 21 bar / NBR-compatible |
| Hydraulic Hose (Low Pressure) | Workshop hydraulic systems | 70-140 bar (1,000-2,000 psi) |
| Hydraulic Hose (High Pressure) | Hydraulic rams + heavy industrial | 200-700 bar (3,000-10,000 psi) |
| Steam Hose (Reinforced) | Saturated steam + hot water service | 16 bar / up to 200°C |
| Chemical Transfer Hose (PTFE / EPDM Lined) | Aggressive chemical handling | Per chemical compatibility |
| Food-Grade Hose (FDA Approved) | Food + bev processing | NSF + FDA compliance |
| Marine Hose (Saltwater) | Marine + saltwater + chloride exposure | NBR + SS reinforcement |
| Dust + Suction Ducting | Dust extraction + workshop vacuum | Low pressure + dust-rated |
Critical: Match hose material rating to fluid — NBR for petroleum oils; EPDM for hot water + most chemicals; PTFE-lined for aggressive chemicals; PVC sufficient for water + compressed air. Hose CLAMPS sized to hose OD + use 2 clamps on high-pressure connections. Companion: hose fittings + couplings, hose + ducting + fittings, pneumatic fittings.
Industrial Hoses for Every Fluid Handling Application
Industrial hose selection requires matching the hose construction, pressure rating, and chemical compatibility to the specific demands of the application. A hose that is correct for compressed air distribution may be entirely unsuitable for hydraulic high-pressure service or chemical transfer, even if the bore diameter is the same. AIMS stocks a comprehensive range of industrial hoses from leading fluid handling brands in configurations covering hydraulic, pneumatic, water, chemical, steam, fuel, and material handling applications across all major industries.
Hydraulic Hose
Hydraulic hose is engineered for the high-pressure, high-impulse service conditions of mobile plant and industrial hydraulic systems. Wire-braided hydraulic hose to SAE 100R1 (single wire braid) and SAE 100R2 (double wire braid) specifications covers the pressure range for most standard hydraulic applications. Multi-spiral wire hose to SAE 100R12 and R13 is used for very high-pressure and high-impulse applications in hydraulic presses, mining equipment, and other demanding environments. Hydraulic hose must always be assembled with correctly crimped end fittings — factory or workshop-crimped assemblies maintain the pressure rating of the hose throughout its service life.
Air and Water Hose
Compressed air hose is available in rubber, PVC, and polyurethane constructions. Rubber air hose is durable and resistant to the oil carry-over from compressors that degrades PVC hose over time, making it the preferred choice for workshop air tools and compressor output lines. PVC braided air hose is lightweight and cost-effective for light-duty applications. Polyurethane hose is highly flexible, kink-resistant, and abrasion-resistant, making it well suited to workshop floor environments. Water and washdown hose in rubber and PVC construction is available for general wash-down, irrigation, and water transfer applications including hot water service grades rated for elevated temperatures.
Chemical and Specialty Hose
Chemical transfer hose must be selected for compatibility with the specific chemicals being handled, including concentration, temperature, and pressure. EPDM hose is used for water-based chemicals, acids, and alkalis. PTFE-lined hose provides the broadest chemical resistance and is specified for solvents, fuels, and aggressive chemicals where standard rubber construction would be attacked. Food-grade hose with FDA-compliant inner tube is required for food processing, beverage, and brewing applications. Steam hose is rated for saturated steam pressure and must be inspected regularly for internal deterioration caused by the combination of heat and moisture.
For hose selection advice, custom cut lengths, or crimped assembly supply, contact our team.
AIMS can supply hose in cut lengths and assemble hydraulic hose sets to length with crimped end fittings. For custom hose assemblies, project supply, or technical guidance on hose specification, contact our team.
Browse our complete hoses range
Hose reels and accessories for water, air and fluid: